PDA

View Full Version : WTB: Axle Allen head bolts



Mr2Brock
07-08-2012, 11:07 AM
Unfortunately while i was driving somehow, my rear right axle cv joint allen head bolts all came off except one causing this (banana shaped metal) puncturing my oil pan and totally caused an oil leak......it looked pretty bad.

It looks like this (not my car)

http://farm7.static.flickr.com/6191/6022479322_41f1360d4e_b.jpg

http://farm7.static.flickr.com/6067/6022479340_68ac44f19a_b.jpg



Does anybody know where I can get these Allen Head Bolts???

I just hope that it just punctured the oil pan and not the engine (where the oil pan mounts) :(

I need these bolts asap

RickDaTuner
07-08-2012, 11:43 AM
Take a trip to pick n pull, find A VW and grab them off the axles.

They are pricey from the dealer, and too specialty to find anywhere else.

The Canadian tire at South Macleod had a great selection of cap screws and bolts, I'm not sure if they still do

mr2mike
07-08-2012, 11:49 AM
The pics are of the block punctured.
If it your oil pan, you should flush the motor in hopes no metal shavings are in it.

Bolts are part# 90110-10007
I think.

Mr2Brock
07-10-2012, 09:55 AM
Thanks Mike, I've got the bolts ordered and ready to be picked up.


As for the damage, unfortunately it punctured the engine about an inch hole >.< don't know what do with it yet, probably weld and fix it up.

mr2mike
07-10-2012, 10:29 AM
I would never advise to have the block welded but the only other option is to change the motor out.

Look to be dropping the oil pan and cleaning that out too.
Redo the gasket maker on that too or you'll forever have oil spots on the garage floor.