View Full Version : Left Lowbeam Socket Melted
DboyNismo
09-20-2015, 01:13 PM
My left lowbeam went out a couple of days ago. When I went to replace them I noticed that one of the pins from the socket was melted. The new bulb didn't light up, however a couple of days later it was working and now its back to not working.
I took a photo of the socket but what I want to know is how I should replace this. Do I just get a new one and replace the old one with it by cutting the old one off and soldering the new one on? Also where would I get the socket for the headlight? I checked the Pick N Pull in Edmonton, but there were no Corollas of that generation. Would the dealership be able to order me one?
Thanks
http://imgur.com/Kcmser7
AE92_TreunoSC
09-20-2015, 02:34 PM
With Toyota Harness's for headlights its easier to go to Napa or Partsource and have them select the socket. Simply show them the style of headlamp bulb (H4 etc) and they will give you one to solder in. :thumbsup:
Tik-Tok
09-20-2015, 03:47 PM
Make sure you're putting the correct bulb in. If it's melting the connector, I suspect it's getting too hot for a reason.
Maxx Mazda
09-20-2015, 06:26 PM
Probably drawing too much power. Make sure your bulbs are the correct wattage. For example don't run a 100W bulb when 55W is stock. You should have a fuse that will blow before this happens though, make sure it's of the proper rating.
DboyNismo
09-20-2015, 07:26 PM
The bulbs in there were from the previous owner. I bought correct wattage bulbs from CT when I swapped them. Ill head to PartSource and see if they have the socket and check for any blown fuses.
Maxx Mazda
09-20-2015, 08:48 PM
On a side note, where do you fly out of? ZVL?
DboyNismo
09-20-2015, 08:52 PM
Originally posted by Maxx Mazda
On a side note, where do you fly out of? ZVL?
When I was still in Calgary I would. Part of the Air Cadets glider crew that operates out of there. In Edmonton I usually fly out of Villeneuve.
Maxx Mazda
09-20-2015, 09:17 PM
Originally posted by DboyNismo
When I was still in Calgary I would. Part of the Air Cadets glider crew that operates out of there. In Edmonton I usually fly out of Villeneuve.
ZVL=Villeneuve
DboyNismo
09-20-2015, 09:55 PM
For some reason I was thinking Vulcan... Mixing up my V's lol. I USED to fly out of Vulcan, now occasionally Villeneuve when I'm not busy with school.
italianstylez
09-21-2015, 07:43 AM
Same thing happened on my 2012 grand Cherokee , oem DRL bulb in oem socket melted part of bulb and socket has obvious blackness to it, and on left side snd I see lots my gen with same left bulb burnt out not sure if weird coincidence or just stupid car manufactures using cheap/wrong stuff
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.