JZS_147
12-08-2015, 10:19 PM
This is beneficial for any 2JZ-GTE making SERIOUS power. This manifold is on many 2JZ drag cars in the low 6's running methanol and 80-90psi of boost.
http://www.pro-jay.com/Toyota-2JZ-GTE-6-Injector-Intake-Combo-PJ-2JZ-GTE-6INJ.htm
ProJay 2JZ Manifold
-A365 heat treated aluminum casting for extreme high boost
-throttle bracket
-105mm throttle body with o-ring seal
-single injector setup
-extruded aluminum -10AN fuel rail
-black wrinkle power coat finish
-correct TPS sensor, brand new OEM Ford part
This part sells for $2200US + Shipping ($140US) = $3250 CDN currently.
Asking a VERY reasonable $SOLD.
No low ballers.
https://c1.staticflickr.com/1/623/23595302656_029f98a1b1_b.jpg
https://c1.staticflickr.com/1/627/23253453749_6cc82687a5_b.jpg
https://c2.staticflickr.com/6/5724/22993149544_42fbfaa9b8_b.jpg
http://www.pro-jay.com/Toyota-2JZ-GTE-6-Injector-Intake-Combo-PJ-2JZ-GTE-6INJ.htm
ProJay 2JZ Manifold
-A365 heat treated aluminum casting for extreme high boost
-throttle bracket
-105mm throttle body with o-ring seal
-single injector setup
-extruded aluminum -10AN fuel rail
-black wrinkle power coat finish
-correct TPS sensor, brand new OEM Ford part
This part sells for $2200US + Shipping ($140US) = $3250 CDN currently.
Asking a VERY reasonable $SOLD.
No low ballers.
https://c1.staticflickr.com/1/623/23595302656_029f98a1b1_b.jpg
https://c1.staticflickr.com/1/627/23253453749_6cc82687a5_b.jpg
https://c2.staticflickr.com/6/5724/22993149544_42fbfaa9b8_b.jpg