rufwon
09-01-2005, 02:39 PM
FOR SALE: 2000 Honda SiR Turbo 354 WHP.....
Now why is he selling it you may be thinking....I am expecting a baby! I am looking to sell it for $21,000, O.B.O. The only extra parts this car comes with other than the obvious is an extra set of turbo plugs, and some touch up paint (although this car is mint and doesnt need the touch up paint, its there if needed)
Now for a few of the mods. As you can see, there was nothing spared putting this engine together. This car is currently set at a very reasonable 12 LBS of boost, and I am putting down 354 WHP. Thats huge, with so much more room to get faster. Race fuel you will be well into the 400WHP+ range. Now for the list of the mods done to this beast!
Short Block - 1mm Overbore, JE Pistons, Eagle Rods, Race Engineering Block Guard (machined), genuine Honda bearrings and gaskets
Headwork - Port, polish, flowbench, and a competition valve grind
Turbo - Precision Ball Bearring SCGT3261 with a 56 trim compressor and a 84 trim turbine wheel
Oil Lines - Goodridge
Manifold - Drag Gen 3 Cast Iron
Downpipe - Custom 2.5" mandrel bent
Dumptube - Mandrel bent
Heat Wrap
Intercooler - Spearco bar and plate
Intake & Piping - Mandrel bent chromed. K&N Filter
Hose / Fittings / Clamps - High temp
BOV - Greddy Type S
Wastegate - Tial 38mm
MAP Sensor - GM 3 Bar MAP
Engine Management - Hondata S200 with boost option
ECU - P28 Chipped ECU and harness
Plug wires - MSD Magnacore
Injectors - RC Engineering 550cc
Fuel Rail - AEM
Fuel Pump - 255LPH Walbro
Fuel Pressure Regulator - AEM
Fuel Filter - AEM
Fuel Pressure Guage - AEM/VDO
Motor Mounts - Energy - Urethane
Clutch - ACT Stage II
Flywheel - JDM ITR
Springs - Eibach Pro Kit
Axel Assembly - Honda - New
Guages Autometer - Carbon Series - Boost, A/F, Oil, Temp.
Guage Pod
Shifter - B&M short shifter
Shifter Bushing Kit - Hurst
Exhaust - Tanabe Hyper Madallion
Catco High Flow Cat - In a Box - Test Pipe with flex section now installed
Wheels / Tires - Stockers, new rubber
Boost Controller - AR Fabrication
Power Pulleys - AEM
Slim Fan - FAL
Alarm System - Clifford
Shift Knob - ITR
Like I said, My baby is on the way, and I need to think about a new life rather than a fast car. The car has about 5-6 thousand miles on the drivetrain, a full mechanical inspection, and compression test. Power doors, windows, moonroof, CD player, A/C. There is Approx. 50,000 miles on the car. This car is hot and it moves. I have recipets here at my house for some of the tuning, parts, and accessories, that add up to over $6000 US and that doesnt even include the actual turbo kit introduced. This car has been appraised at over $30,000. I also have a dyno sheet with the 350 WHP run.... I will give the buyer all the reciepts and the dyno sheet.
HELP ME SELL MY CAR AND I WILL PERSONALLY PAY YOU!
I have seen the same civics without the turbo mods going for $16,000 plus, so I believe this price is more than reasonable.
(780)232-9996
or email
[email protected]
Thank you all
Keith
http://memimage.cardomain.net/member_images/11/web/2075000-2075999/2075304_2.jpg
http://memimage.cardomain.net/member_images/11/web/2075000-2075999/2075304_1.jpg
I have more pics if interested! I can email them! :thumbsup:
Now why is he selling it you may be thinking....I am expecting a baby! I am looking to sell it for $21,000, O.B.O. The only extra parts this car comes with other than the obvious is an extra set of turbo plugs, and some touch up paint (although this car is mint and doesnt need the touch up paint, its there if needed)
Now for a few of the mods. As you can see, there was nothing spared putting this engine together. This car is currently set at a very reasonable 12 LBS of boost, and I am putting down 354 WHP. Thats huge, with so much more room to get faster. Race fuel you will be well into the 400WHP+ range. Now for the list of the mods done to this beast!
Short Block - 1mm Overbore, JE Pistons, Eagle Rods, Race Engineering Block Guard (machined), genuine Honda bearrings and gaskets
Headwork - Port, polish, flowbench, and a competition valve grind
Turbo - Precision Ball Bearring SCGT3261 with a 56 trim compressor and a 84 trim turbine wheel
Oil Lines - Goodridge
Manifold - Drag Gen 3 Cast Iron
Downpipe - Custom 2.5" mandrel bent
Dumptube - Mandrel bent
Heat Wrap
Intercooler - Spearco bar and plate
Intake & Piping - Mandrel bent chromed. K&N Filter
Hose / Fittings / Clamps - High temp
BOV - Greddy Type S
Wastegate - Tial 38mm
MAP Sensor - GM 3 Bar MAP
Engine Management - Hondata S200 with boost option
ECU - P28 Chipped ECU and harness
Plug wires - MSD Magnacore
Injectors - RC Engineering 550cc
Fuel Rail - AEM
Fuel Pump - 255LPH Walbro
Fuel Pressure Regulator - AEM
Fuel Filter - AEM
Fuel Pressure Guage - AEM/VDO
Motor Mounts - Energy - Urethane
Clutch - ACT Stage II
Flywheel - JDM ITR
Springs - Eibach Pro Kit
Axel Assembly - Honda - New
Guages Autometer - Carbon Series - Boost, A/F, Oil, Temp.
Guage Pod
Shifter - B&M short shifter
Shifter Bushing Kit - Hurst
Exhaust - Tanabe Hyper Madallion
Catco High Flow Cat - In a Box - Test Pipe with flex section now installed
Wheels / Tires - Stockers, new rubber
Boost Controller - AR Fabrication
Power Pulleys - AEM
Slim Fan - FAL
Alarm System - Clifford
Shift Knob - ITR
Like I said, My baby is on the way, and I need to think about a new life rather than a fast car. The car has about 5-6 thousand miles on the drivetrain, a full mechanical inspection, and compression test. Power doors, windows, moonroof, CD player, A/C. There is Approx. 50,000 miles on the car. This car is hot and it moves. I have recipets here at my house for some of the tuning, parts, and accessories, that add up to over $6000 US and that doesnt even include the actual turbo kit introduced. This car has been appraised at over $30,000. I also have a dyno sheet with the 350 WHP run.... I will give the buyer all the reciepts and the dyno sheet.
HELP ME SELL MY CAR AND I WILL PERSONALLY PAY YOU!
I have seen the same civics without the turbo mods going for $16,000 plus, so I believe this price is more than reasonable.
(780)232-9996
or email
[email protected]
Thank you all
Keith
http://memimage.cardomain.net/member_images/11/web/2075000-2075999/2075304_2.jpg
http://memimage.cardomain.net/member_images/11/web/2075000-2075999/2075304_1.jpg
I have more pics if interested! I can email them! :thumbsup: