PDA

View Full Version : FS: 96 Acura Integra



ToanZ_StyleZ
11-16-2005, 02:14 PM
1996 Acura Integra
243XXX on body, ~52000 on engine
99 J-Spec B20B with RARE P8R head (head has 33mm intake valves just like the vtec head)
Custom Cold Air Intake
DC Sports 4-2-1 Header
Custom 2.5" Catback with 5Zigen Muffler
Hi-Flow Cat Converter
Exedy Stage 1 Racing Clutch
Type R Radiator
Eibach Sportline Springs
KYB AGX 4 Way Adjustable Struts
Rototech Crossed Drilled and Slotted Rotors
DC Sports Front Strut Bar
DC Sports Lower Tie Bar
Mugen Replica Steering Wheel
Solo Short Shifter
Titanium Type R Shiftknob
Tenzo R Type R Seats
JVC KDLH810 MP3 Deck
4 6.5" Pioneer 160 Watts Speakers
2 10" Rockford Punch P2
Rockford P6001 Amp
Air/Fuel Ratio Gauge
Voltmeter Gauge
Extreme Front Bumper
OEM Side Skirts
Combat Rear Bumper
Type R Spolier
17" Konig Monsoon w/ Nexen 3000 tires 90% tread left

13000 obo

here's the most recent pic, taken at Drive To Perform 2005

Darkane
11-16-2005, 02:36 PM
curious, do ya know for a fact this is a '99 Spec B20? As far as i know P8R only came on '97s and POSSIBLY 98's. The thought of a 99 with the High CR and P8R head would run big numbers. Got any timeslips or anything?

Edit: P8R also come with 84MM CC's just so people know :).

Bump for the head ALL b20's should have come with. :eek:

ToanZ_StyleZ
11-16-2005, 03:05 PM
I got this engine from JDM Source from Shoaib, dun remember if he said it was 98 or 99

dun have timeslips or anything, never had the chance to run it at racecity but always wanted to know wht my car can pull

all i gotta say is this car pulls hard from 3K and on

psi_klops
11-16-2005, 06:49 PM
What kind of HP is this thing puttin out approx??
What model integra?

toocrude_mr2
11-16-2005, 07:17 PM
wow such a nice Teg, are u considering trades?

ToanZ_StyleZ
11-16-2005, 08:56 PM
psi_klops
it's an integra rs
rated hp is 146 with 133ft.lbs @ 4300 RPM
this is wht's so grreat bout the b20, mid range torque

toocrude_mr2
i would consider trades, it just depends wht...

gerrycurl21
11-16-2005, 10:59 PM
damn nice car, willin to part out the skirts?

Darkane
11-17-2005, 01:58 AM
Originally posted by ToanZ_StyleZ
I got this engine from JDM Source from Shoaib, dun remember if he said it was 98 or 99

dun have timeslips or anything, never had the chance to run it at racecity but always wanted to know wht my car can pull

all i gotta say is this car pulls hard from 3K and on

Yeah Im sure its not a '99, but with my B20 in my teg with P8R With JUST bolt ons I went 15.8@86MPH. 60ft was 2.3. Car weight was 2750 - yeah im heavy :D

With slicks and a good 2.1-2.0 60Ft low 15's is possible and this with 3600ft Elevation.

ToanZ_StyleZ
11-21-2005, 09:20 PM
bump