PDA

View Full Version : deck install help



redline_13000
02-22-2003, 01:21 AM
hey guys, just want to make sure im right, i have a pioneer deck im trying to install for a friend, only wires im not 100% sure of are the red, yellow, and orange ones, can someone tell me exactly where they go? ign or 12+ etc, thanks

ramminghard
02-22-2003, 02:11 AM
Pretty sure Yellow is power and red is ignition. Orange may be the dimmer??

redline_13000
02-22-2003, 03:03 AM
thanks dude, already got it:)

ramminghard
02-22-2003, 07:46 PM
was I right??

redline_13000
02-22-2003, 09:34 PM
I was thinking what you were thinking, but the problem was, the wiring color codes i got off the net were different from the car, for example, pioneer red wire goes to the honda red/yellow, in the honda, it ended up being a green and black wire, the yellow/red was a speaker wire, i guess someone who previously owned the car screwed all the wiring up.

ramminghard
02-22-2003, 09:50 PM
I had the same problem with my truck when i got it. All the speaker wire was the same colour, the power and sys. remote were both run off constant 12V power so the deck would turn on even if the key wasn't in, and the ground was red. The dash kit was also made out of a sheet of plexiglass and glued into the dash.

dogstar
02-23-2003, 07:22 PM
i just had the same problem on my friends deck, but if all goes well, ill be doing an under dash rewire for stereo on both his car, and mine.