Weapon_R
01-11-2006, 10:22 PM
I have a digital home receiver for sale. I've owned it for a couple of years and it has given me no problems. Let's say $75obo. I'm only replacing because I upgraded.
Akai Reference Master AM-73
Cost: £549.90 (Retail Sept 1999, Akai Price List)
$1242.77 Canadian
Details According to Operators Manual (E)
Power Output (1 kHz, 0.7%) 120W (8 Ohms)
150W (6 Ohms)
180W (4 Ohms)
FTC (20Hz to 20kHz) 120W (8 ohms, 0.05%)
150W (6 ohms, 0.07%)
180W (4 Ohms, 0.1%)
Dynamic Power 145W (8 Ohms)
180W (6 Ohms)
250W (4 Ohms)
400W (2 Ohms)
Power Band Width 10Hz to 60 kHz/0.1%
Total Harmonic Distortion 0.008% (1kHz, 8 Ohms)
Phono max, input level 200mV (MM)
Frequency Response 3 Hz to 100 kHz
(+0 db, -3 db)
Tone Control
Treble + - 10 db (10 kHz)
Bass + - 10 db (100 Hz)
Input sensitivity/ impedance
Phono (MM) 2.5mV/ 47 kohms
Phono (MC) 0.25mV/ 470 Ohms
Tuner, etc 150 mV/ 47 kohms
Output level/ impedance
Tape rec out 150 mV/ 1 kohmn
Damping factor 50 (1 kHz)
Residual noise 0.5 mV
S/N
Phono (MM) 85 db
Phono (MC) 67 db
Tuner etc 100 db
Channel Seperation 60 db
Audio Mute -20 db
Required speaker impedance
A or B 4 to 16 Ohms
A and B 8 to 16 Ohms
(D/A Section)
Sampling Frequency 32kHz/44.1kHz/48khz
Digital Filter 8 fs, 18 bit
D/A Convertor 16 Bit, 2 DAC
Digital input level/ impedance
Coaxial 0.5Vp-p/75 ohm
Optical -14 to -23 dBm
Frequency Response 5 Hz to 20 KHz
(+ - 0.3db)
Dynamic Range 95 db
Total Harmonic Distortion 0.003%
Channel Separation 115 db
On the Akai amp on a-channel the right side isnt working properly, southland electronics told me it would cost around $70 to fix, but B-channel works fine and powers two bookshelves very well.
Akai Reference Master AM-73
Cost: £549.90 (Retail Sept 1999, Akai Price List)
$1242.77 Canadian
Details According to Operators Manual (E)
Power Output (1 kHz, 0.7%) 120W (8 Ohms)
150W (6 Ohms)
180W (4 Ohms)
FTC (20Hz to 20kHz) 120W (8 ohms, 0.05%)
150W (6 ohms, 0.07%)
180W (4 Ohms, 0.1%)
Dynamic Power 145W (8 Ohms)
180W (6 Ohms)
250W (4 Ohms)
400W (2 Ohms)
Power Band Width 10Hz to 60 kHz/0.1%
Total Harmonic Distortion 0.008% (1kHz, 8 Ohms)
Phono max, input level 200mV (MM)
Frequency Response 3 Hz to 100 kHz
(+0 db, -3 db)
Tone Control
Treble + - 10 db (10 kHz)
Bass + - 10 db (100 Hz)
Input sensitivity/ impedance
Phono (MM) 2.5mV/ 47 kohms
Phono (MC) 0.25mV/ 470 Ohms
Tuner, etc 150 mV/ 47 kohms
Output level/ impedance
Tape rec out 150 mV/ 1 kohmn
Damping factor 50 (1 kHz)
Residual noise 0.5 mV
S/N
Phono (MM) 85 db
Phono (MC) 67 db
Tuner etc 100 db
Channel Seperation 60 db
Audio Mute -20 db
Required speaker impedance
A or B 4 to 16 Ohms
A and B 8 to 16 Ohms
(D/A Section)
Sampling Frequency 32kHz/44.1kHz/48khz
Digital Filter 8 fs, 18 bit
D/A Convertor 16 Bit, 2 DAC
Digital input level/ impedance
Coaxial 0.5Vp-p/75 ohm
Optical -14 to -23 dBm
Frequency Response 5 Hz to 20 KHz
(+ - 0.3db)
Dynamic Range 95 db
Total Harmonic Distortion 0.003%
Channel Separation 115 db
On the Akai amp on a-channel the right side isnt working properly, southland electronics told me it would cost around $70 to fix, but B-channel works fine and powers two bookshelves very well.