PDA

View Full Version : Compustar 2wss-as Help



99Escalade
02-23-2006, 07:18 PM
I have a 99 Escalade with a 2wss-as Compustar system installed. It was not installed by a dealer, I installed it. I like the system but an having a problem. When I use the remote starter I get a check engine light. If I try to drive it the Transmission slips and shifts badly. I have to clear the code then all is OK. The install guide does make reference to a second start wire that needs to he hooked up but it does not tell me to what! Does anyone know how I can fix this? Thank you in advance. George:dunno: :banghead:

tc3
02-23-2006, 08:27 PM
U MUST hook up the 2nd starter wire and any 2nd ign or 2nd acc.
If not, ull get eng lights, tranny problems, sec light....etc
U need to get a wiring diagram for ur truck to determine 2nd ign, start,acc.
If ur not familar with it, Suggest u take it to a pro.
AC is good for that.

99Escalade
02-23-2006, 08:42 PM
I have the full manual set. When you say "any 2nd ign or 2nd acc" do you mean hook the 2nd starter wire to any ign or acc wire? The print does not have any wires that say 2nd ign or 2nd acc. Thank you George

Jonathan@TCS
02-24-2006, 10:57 AM
Hookup second IGNition, ( possibly white, green, or pink ). The starter brain should have an extra external relay that you can choose to use for 2nd ignition.

tc3
02-24-2006, 02:26 PM
Originally posted by 99Escalade
I have the full manual set. When you say "any 2nd ign or 2nd acc" do you mean hook the 2nd starter wire to any ign or acc wire? The print does not have any wires that say 2nd ign or 2nd acc. Thank you George

No, u must wire thru a relay ur 2nd whatever. U must know if it is acc, ign or starter to power up that relay acordantly.

99Escalade
02-24-2006, 05:12 PM
Done. Thanks!:clap:

tc3
02-25-2006, 11:19 AM
Good to hear!!!