Audio interconnects + install inputs...

[t_mo_t]

Anybody recommend any audio interconnects? 4-channel and 2-channel?

monster cable(which series?), stinger(which series?), tsunami(which series?), knukonceptz?

where can i get streetwires?

2)
this is my current setup

http://memimage.cardomain.net/member_images/11/web/443000-443999/443535_95_full.jpg

http://memimage.cardomain.net/member_images/11/web/443000-443999/443535_96_full.jpg

(Dont quote me on that MTX sticker up there, i'd taken it out... :p)

so ok, here's my dilemma, i just bought a 300/4 and 500/1 JL... i have 1 location to place my amplifier at... which is at the original location... but where should i put my 2nd one?

my initial idea:
build another amp rack right in front of the box so that it looks like

http://i5.photobucket.com/albums/y161/t_mo_t/Subloc.jpg

a fast MS paint job...
http://i5.photobucket.com/albums/y161/t_mo_t/Subloc1.jpg

btw, there will be another mdf for the 2nd amp, i forgot to draw a red line there... so i wont be mounting the amp on my sub/amp rack..

i dont know how to fg, so that is out of the question...

so any other ideas? or comment about my idea? or anything?? thanks guys.. !!

[f150mikey060]

for rca's go to walmart and pick some up. they are efx by scosche, so its all good.

as for the box...it looks like part fiberglass to me, is this correct? if so, take it to the same people who made it, if not, try fiberglass. it is not nearly as hard to use as you may think. there is a first time for everything.

IMO, i cannot really see a good way of doing it and having it look very good at all other then using FG.

[Richard1]

GO TO AN ELECTRONICS STORE AND PURCHASE CANARE'S QUAD CABLE. USE NEUTRIC RCA'S, CUT TO LENGTH, ADD SOME TEXFLEX IF YOU WANT, AND YOU'RE SET TO GO. SOLDER THE TWO BLACKS TOGETHER, THEN THE WHITES FOR YOUR HOT AND GROUND - OR - USE ONE CABLE AND ATTACH TWO RCA'S AT EACH END USING ONE WHITE AND BLACK WIRE FOR EACH PLUG. THIS EXTREMELY HIGH END MICROPHONE CABLE IS COMPARBLE TO SOME OF THE HIGHEST END (AND MOST EXPENSIVE) AUDIOPHILE INTERCONNECTS ON THE MARKET. YOU WILL NOT BE DISAPPOINTED AND SAVE A WAD OF MONEY.

RICHARD

[97'Scort]

Edit: why are we dredging up this old thread?