View Full Version : Bolt Pattern
Anton
09-21-2006, 10:51 PM
Hey, does anyone know the bolt pattern for a 2000 Hyundai Tiburon?
I looked it up and called Hyundai and they said 4x114.3 btu rims that I got which were 4x114.3 didn't fit...:dunno:
Thanks!
A2VR6
09-21-2006, 11:15 PM
Hmm so it didnt slide on at all? I guess you could try measuring it yourself, and measure the diagonal between two studs.
Anton
09-21-2006, 11:22 PM
Not at all, quite a bit off actualy. The thing is that I am picking up 2 tibs from s10andy and they are getting towed tomorrow but one is missing 2 tires...I bought some rims that were supposed to fit but they didn't..
Anton
09-22-2006, 10:06 AM
NVM, tow truck guy said he can just tow it on 3...
dj_rice
09-22-2006, 08:53 PM
Hyundai Tiburon Base/FX 1997-up (4x114.3mm / HPO / 12x1.5 Lug-nut / 67.10mm Bore)
AllGoNoShow
09-22-2006, 09:06 PM
Rims you got were probably 4x100 not 114
tirebob
09-23-2006, 09:33 AM
Is it over the studs it won't fit or it just doesn't fit 'properly'? I ask because Hyundais of this era frequently have a retaining screw on the hub/rotor assembly which most aftermarket wheels do not accomadate. It usually has to be removed before using aftermarket rims...
Anton
10-06-2006, 12:58 PM
Sorry for not replying.. Haven't checked this thread for a while.
Rims were dual size. 4x100 and 4x114.3
CMSBob: They wouldn't fit at all.
Anyways, I don't own this car anymore. Thanks for the replys :thumbsup:
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.