Accessing trouble codes on an EG civic?

[TurboMedic]

Anyone know how to do this? My CEL came on, and went away....now I want to know what it was telling me! Thanks..

[LilDrunkenSmurf]

If it's off... :dunno:
EG ECU is under the passanger side carpet, mounted to the side right in front of the wall, there should be a sticky on here and how to pull the code, if not, autovalue should be able to do it aswell.

[IntegraG2]

if the car is off find the diagnostic plug near the ECU it should be a two pin connector. using a wire that is stripped on both ends ground the plug by inserting both ends of the wire into each pin of the plug.....then turn the key to accesory...see how many times the engine light flashes then go on the net and find what code its throwing...

long flashes are 10
quick flashes are 1


example 2 long flashes and one quick flash is 21

use this as your code identifier
http://www.boostedmonkey.com/forums/viewtopic.php?t=49

hope this helps..

if you need more help pm me...i will take a picture of the plug and its location...

Les

[TurboMedic]

Thanks, I'll try this when I get the car back today...