Rockford Fosgate Fanatic P Components and Punch XLC

[D'z Nutz]

This stuff is a bit older, but still in decent condition and works very well.

Rockford Fosgate Fanatic P component speakers:
5 1/4" midrange
3/4" tweeter
4 ohm impedance
50 watts RMS

http://pages.cpsc.ucalgary.ca/~woode/audio/comp_box.jpg

http://pages.cpsc.ucalgary.ca/~woode/audio/comp_man.jpg

http://pages.cpsc.ucalgary.ca/~woode/audio/comp_contents.jpg

Midranges:
http://pages.cpsc.ucalgary.ca/~woode/audio/comp_woofer.jpg

Tweeters:
http://pages.cpsc.ucalgary.ca/~woode/audio/comp_tweeters.jpg

Crossovers:
http://pages.cpsc.ucalgary.ca/~woode/audio/comp_xover.jpg

Tweeter mounts (flush/surface/wedge):
http://pages.cpsc.ucalgary.ca/~woode/audio/comp_mount.jpg


Note: the only thing wrong with these is there's a slight puncture on the foam surrond (NOT the cone). The hole does not affect the sound, and the speakers still sound excellent. In fact, I've been using these speakers for a couple years without realizing that there even was a hole.

http://pages.cpsc.ucalgary.ca/~woode/audio/comp_hole.jpg

As you can see from the above images, it comes with the original box and manual.

$120 obo

[D'z Nutz]

Next, I have a Rockford Fosgate 12" Punch XLC subwoofer with a sealed box.

4 ohms
200 watts RMS
400 watts peak

I believe the internal volume of the box is 1.25 cu. ft.

http://pages.cpsc.ucalgary.ca/~woode/audio/xlc_01.jpg

http://pages.cpsc.ucalgary.ca/~woode/audio/xlc_02.jpg

http://pages.cpsc.ucalgary.ca/~woode/audio/xlc_03.jpg


Comes with original box, manual, foam gaskets, and decal.

$140 obo.

[EG STyLeZ]

Originally posted by D'z Nutz


Note: the only thing wrong with these is there's a slight puncture on the foam surrond (NOT the cone). The hole does not affect the sound, and the speakers still sound excellent. In fact, I've been using these speakers for a couple years without realizing that there even was a hole.



what?? haha i didn't even notice! they sound just as good man!

[D'z Nutz]

I don't want this stuff sitting around the house, so I'm gonna lower the price.

Sub and box - $100
Components - $80

Prices are pretty much firm.

[guitardemon]

i'm interested... do you have an amp by any chance??:)

[D'z Nutz]

I do have a couple amps, but I was sort of planning on keeping those, since decent amps don't come cheap. However, if I get a good offer, I would consider letting them go (not ridiculously cheap, though).

I have a Rockford Fosgate 250a2 and a Rockford Fosgate 200a4.

250a2 - rated 125 watts x 2, 250 watts x 1
200a4 - rated 50 watts x 4, 100 watts x 2

Birth certificates state the output wattage a bit higher. I think the 250a2 is about 360 watts, and the 200a4 is about 250, but I could be way off. The 250a2 powered the XLC, and I only used two channels on the 200a4 to run the components.

If you're seriously interested in the amps, let me know and I'll post more information, along with the actual birth certificate ratings and images. As with all my audio equipment, I still have the original stuff it came with. In this case, I still have the boxes, the birth certificates, fuses, fuse holders (not used for either amp), the allen wrenches, the decals, and the manuals.

[D'z Nutz]

Components are gone.

[D'z Nutz]

All gone.