FS: 500 hp 1993 383 Stroker Camaro Z28...will consider certain Trades

[Gripenfelter]

I'm thinking about selling my car. Since my daughter was born and we adopted Zeus, I have driven it less than 1000 kms in 18 months. Just not practical anymore. If you're interested, shoot me a PM.

http://members.shaw.ca/stroker383lt1/8.jpg
http://members.shaw.ca/stroker383lt1/9.jpg
Sorry for the dusty interior. This was just after it came out of storage this year.
http://members.shaw.ca/stroker383lt1/11.jpg
http://members.shaw.ca/loud_ass_lt1/Staging.jpg
http://members.shaw.ca/loud_ass_lt1/wheelsup.jpg

Motor:
383 LT1
Stock block bored .30 over
Callies Dragonslayer 3.75" Crank
SRP 11:1 forged pistons
Eagle 6.0" H-rods
Canton oil pan
Melling oil pump
AFR Rev kit
Comp 987 valve springs
Comp Pro Magnum 1.6 rockers
Titanium retainers
Stock ported LT1 heads (272/191 cfm @.550 lift)
Comp R lifters
Custom grind cam 234/242 .568/.568 109 LSA
SVO 30# injectors
Walbro 255 LPH pump
52mm home ported TB
Callaway Cold Air Intake
CSI electric waterpump
Hooker 1 3/4" Long Tube Headers
3" true dual exhaust
3" Magnaflow mufflers
Tuned via laptop

Transmission:
700R4
3200 stall converter
Trans Go Stage II

Suspension:
Full rear suspension. Custom fabricated front K-member and A-arms with HAL 12 way adjustable shocks front and rear.

Stereo:
Alpine V12 amps, Kenwood deck, MTX mids, JL W0 subs, 1200 watts.

Misc:
Many custom mods that you won't find on any other car such as a 2005 LS2 Corvette coil pack ignition system to replace the POS optispark, billet dress up under the hood, custom interior, custom made 3" true dual over the axle exhaust with billet SS tips, etc.

Dynoed at 422rwhp all motor.

Ran [email protected] mph on 10 degrees of knock and a spun bearing before it was rebuilt by Redline Racing Engines. New pistons, bearings, seals, and crank in rebuild. Will easily run mid 11s or faster all motor now. Could easily handle a 200hp shot of nitrous. Bottom end built to handle 750hp. The motor has less than 3000 kms on it since the rebuild. The transmission was rebuilt 7000 kms ago and is still going strong.

I probably missed a bunch of stuff to list as mods.

TNT nitrous kit also available seperately. Never installed on car.

Also might sell motor and tranny seperately.

$19,900!!

[frank_grimz14]

Original Post Removed. (Please read the Forum Rules and Terms of Use (http://forums.beyond.ca/articles.php?action=data&item=1) before posting again, or risk getting banned).

[Gripenfelter]

PM me with any questions.

Here are a couple of videos.

http://members.shaw.ca/tallc00l1/Drive.wmv

http://members.shaw.ca/velvet_hammer/Idle.wmv

http://members.shaw.ca/velvet_hammer/Launch.wmv

[sk65guy]

Original Post Removed. (Please read the Forum Rules and Terms of Use (http://forums.beyond.ca/articles.php?action=data&item=1) before posting again, or risk getting banned).

[Gripenfelter]

Spring is right around the corner. Car needs nothing. Its ready to rock at the track or on the strip!

[MonteCarloLS]

How much for the motor and tranny?

[Gripenfelter]

Originally posted by MonteCarloLS
How much for the motor and tranny?

PM me an offer. Motor has $13,000 into it and tranny was $3000. Very low KMs on both and you can also contact the engine builder for any questions you might have.

[Gripenfelter]

I have too many cars...BUMP!

[Gripenfelter]

Will throw in a set of new draglites and a set of huge ET streets for the right buyer.

[Gripenfelter]

Car needs nothing to safety.

[Gripenfelter]

http://members.shaw.ca/serial_thriller/ZL1_7.jpg

[Gripenfelter]

Will take a Toyota FJ Cruiser as a straight trade.

[Gripenfelter]

This is the fastest naturally aspirated LT1 in Manitoba.

[Gripenfelter]

http://members.shaw.ca/skin_industries/engine.jpg

Custom made billet aluminum fuel rail covers, radiator shroud, and fuse box.

[Deamer]

take straight trade for a 2000 explorer limited ?? lol

[Gripenfelter]

Oh God lol.

Sell your truck and get a loan. :)

[Gripenfelter]

Lots of bites. Two close calls. No one in Alberta has credit?? Please make sure you are able to get a bank loan before trying to close the deal. Had two people with the same issue. :banghead:

[R!zz0]

how's your CME valance holding up?

[sputnik]

http://members.shaw.ca/loud_ass_lt1/Staging.jpg

NICE. My old baby blue 64 Valiant is in this picture.

[Gripenfelter]

Originally posted by R!zz0
how's your CME valance holding up?

Its not the crappy factory cast aluminum one that were prone to cracking. I had an exhaust shop make this one. :)

[R!zz0]

Originally posted by Gripenfelter


Its not the crappy factory cast aluminum one that were prone to cracking. I had an exhaust shop make this one. :)

Tell me about it...I had a guy from the states custom fab it for me.
I don't like the stock ones too.

[Gripenfelter]

Nice. PM me a link to your car. :)

[Gripenfelter]

Cruising weather is here and this car will make everyone's head turn.

[sneek]

What happened to Peter?

[Gripenfelter]

Originally posted by sneek
What happened to Peter?

He was supposed to call me Wednesday to tell me how is financial situation was and never got back to me . :dunno:

[sneek]

Originally posted by Gripenfelter


He was supposed to call me Wednesday to tell me how is financial situation was and never got back to me . :dunno:

cool, ill try to give him a ring tomorrow and see whats going on.

[Gripenfelter]

If anyone here can sell this car for more than $20,000 you can keep the difference.

Ex: You sell the car for $24,000, you pocket $4000.

[Gripenfelter]

I'm putting this car back on the road this weekend and will drive it about 2 hrs every weekend for cruise night till its sold.

[Gripenfelter]

TNT wet nitrous kit with 150 hp jets which is available seperately:

http://texasnitroustechnology.com/store/product_info.php?cPath=21&products_id=85&osCsid=9e4982ac2d6e6d7463a25ecc5c6f835e

[SickBastard]

Bump for you grip. Seen this car in person, its a beast!!

[Takahashi]

if you put a honda badge on it you'd get more bites....

kidding....

this board is honda dominated, it'll be tough to sell a beast like this here....

[Gripenfelter]

Thanx Sean.

Actually I've had quite a few bites but no one has cash. :(

[dhawk44]

trade for 99 Denali mint dvd screens bunch of shit

[Gripenfelter]

Sorry not interested. I'm sure its a nice truck but your best bet would be to sell the truck and buy my car. :)

[lostx_o]

sick ride y0!

[Gripenfelter]

Thanx. The car will lift the front end and you see nothing but sky on ET streets.

http://members.shaw.ca/serial_thriller/14%20044.JPG

[Gripenfelter]

Still for sale. Lots of bites but no dice when it comes to cash. :(

[Gripenfelter]

front suspension

http://members.shaw.ca/stroker383lt1/13%20002.jpg

[Gripenfelter]

Install the nitrous kit that I'm selling seperately and you can have a 650 hp car for $20G. Actually the bottom end can handle 750 hp.

[Gripenfelter]

650hp would be enough for 10s.

[Gripenfelter]

Still for sale.

I'd take $18,000 firm with no stereo, no slicks, and none of the extras like the scan tool and extra engine parts.

Or $20,000 for everything. I'll throw in the Nitrous kit at this price too.

[Gripenfelter]

It also has a pager alarm with 1/2 KM radius range and perimeter sensor.

[Gripenfelter]

Car will be featured in Autonet magazine this week.

[Gripenfelter]

Bump!

[Gripenfelter]

Bump!

[Gripenfelter]

It can smoke the new LS2 Vettes or the old LS6 Z06s.

[Gripenfelter]

Took these pics tonight:

http://members.shaw.ca/pwrtrip/87%20118s.jpg

http://members.shaw.ca/pwrtrip/87%20086s.jpg

http://members.shaw.ca/pwrtrip/87%20130s.jpg

http://members.shaw.ca/pwrtrip/87%20153s.jpg

http://members.shaw.ca/pwrtrip/87%20155s.jpg

[Gripenfelter]

I've started driving it to work everyday since the Maxima is sold.

[Gripenfelter]

Featured in AutoNet magazine:

http://www.winnipegsun.com/AutoMarket/2007/07/13/4335837-sun.html

Typo: 3" duals not 2.5".

[Gripenfelter]

Will consider 2002+ Yukon/Denali/Escalade or a 2002+ Altima SE 3.5L with 5 speed as partial trade depending on KMs.

Also looking for:

Infiniti FX45 (My car + cash obviously)

[Gripenfelter]

Also considering:

2004+ Ford F150 FX4
Dodge Ram with hemi

[Gripenfelter]

I was just contacted by Nitto Tires and informed that my car will be featured in a Nitto tire ad in Super Chevy Magazine later this year. They're coming up to shoot my car later this month. I'll post the ad when its published. :)

[Gripenfelter]

My car will also appear in Camaro Performers magazine in their November issue as a reader's ride.

Nitto tire ad will be around the same time.

[Konj]

Your car is getting alot of REP in magazine's are you sure you wanna sell it? Anyways seems like you have bad luck history on getting the deal's through good luck with the sale.

[Gripenfelter]

Originally posted by Konj
Your car is getting alot of REP in magazine's are you sure you wanna sell it? Anyways seems like you have bad luck history on getting the deal's through good luck with the sale.

Yup. 13 interested buyers. 0 buyers with enough credit/cash to close the deal. :(

If it doesn't sell by spring I'll be parting out the powertrain.

[Gripenfelter]

Last chance...

I have a pending sale for the motor alone unless someone wants to take the entire car.

[Gripenfelter]

http://i203.photobucket.com/albums/aa320/azvforce/nitto.jpg

Top right corner.

[Gripenfelter]

From Camaro Performers Magazine.

http://aycu24.webshots.com/image/29983/2003384319749016730_rs.jpg

They embellished the story a little.

[Gripenfelter]

http://i230.photobucket.com/albums/ee80/roninz28/100_5304.jpg

http://i230.photobucket.com/albums/ee80/roninz28/100_5305.jpg