PDA

View Full Version : HELP: Fuse For Power Window



Mr. R
04-20-2007, 01:38 PM
Hi. I have a JDM 91 MR2 and I'm pretty sure my fuse for the passenger side in shot. My owner's manual is in Japanese so no help there but does anyone know where the fuse is located for the window switch? Thanks.

jvillain
04-23-2007, 11:03 AM
I think but I am not sure without looking that the power windows for both sides are on the same circuit. So if one side is out it is more likely the wire broke down by the hinge. It is pretty common. I will be out working on my car this afternoon so I will check the fuse blocks.

mr2mike
04-23-2007, 12:58 PM
Another suggestion is to take off the door panel. Then take of the connector for the power window motor and check if you get power there. From there, you could then trace it back to relays or whatever else is on the circuit.
www.mr2-tech.com/bgb.htm check the wiring diagram.

I've never dealt with Toyota power windows but have done Nissan and Ford windows.