Talon clutch problems: part 2

[Talon23]

alright so my clutch started feeling like it was gone...and i fugured out that i had no clutch fluid left in my freakin resevoir. so i filled it up with some dot3 brake fluid and figured that it might be fixed. after i had done this, not much had changed. i pumped the clutch for a while and so me air bubbles came out, and i did that until it stopped. and now my clutch is just doing what it did before. i was thinking maybe i have to bleed the lines. any advice?

[dankish1]

yes you have to bleed it for a longgggg time
a good 20 min
its a pain in the ass
you should look for leaks around the slave cylinder and on the clutch lines and master cylinder

[Talon23]

alright thannks man.

[ercchry]

yeah bleed that shit, pump it up till the pedal is hard (or not getting any harder) then hold it down and loosen the bleeder screw on the slave and then let out the bubbles till it is liquid, then close screw and let clutch out, top up fluid then repeat

[Isaiah]

What year is your Talon? If it's a later model, then it's a hydraulic clutch and there's a good possibility that there's a leak in your clutch hose.

[Talon23]

yeah its a 95

[Talon23]

:thumbsup: