evo916
06-03-2007, 09:41 AM
After much consideration I have decided to sell my toy. lots of work and money has been invested into this car it is just not ideal for my current job as I do lots of city driving and need to carry passengers.
Specs: Maroon exterior, mint red cloth interior
216XXXkm, freshly rebuilt 6 bolt motor with ARP headstuds, 3g lifters and all new seals and gaskets.
drivetrain including transmission and 4 bolt rear end are in great shape.
many parts have been replaced and I have a folder full of reciepts also.
newer tires/windshield
no rust
performance mods:
Buschur racing Evo III 16g turbo
Megan racing 3'' stainless full exhaust
ACT 2600 clutch kit
Rochester 680cc injectors
Innovate LC1 wideband 02 sensor with all software for monitoring A/F's
Eprom ECU socketed and chipped for injector compensation, no rev limiter etc..
3'' GM maf in a blow through setup for venting
MAFT translator v 2
ported 2g manifold
ported 02 housing
2g throttle body elbow
plam m100 with mmcd for logging car
kyb gr2's with H&R springs
autometer boost guage on pillar
3'' custom intake
2.5'' UICP with modded 1g blow off valve
MBC currently running 15 psi never higher since rebuild
possibly forgetting some stuff
Things worth noting:
clearcoat is chipped a bit on passenger side near window
fabricated UICP has some small boost leaks
front brakes are >5%, but will be replaced before sale
located in Calgary
Asking new price SACRIFICE 5200 or I will be trading it in, over 3500 invested in the past few months
Specs: Maroon exterior, mint red cloth interior
216XXXkm, freshly rebuilt 6 bolt motor with ARP headstuds, 3g lifters and all new seals and gaskets.
drivetrain including transmission and 4 bolt rear end are in great shape.
many parts have been replaced and I have a folder full of reciepts also.
newer tires/windshield
no rust
performance mods:
Buschur racing Evo III 16g turbo
Megan racing 3'' stainless full exhaust
ACT 2600 clutch kit
Rochester 680cc injectors
Innovate LC1 wideband 02 sensor with all software for monitoring A/F's
Eprom ECU socketed and chipped for injector compensation, no rev limiter etc..
3'' GM maf in a blow through setup for venting
MAFT translator v 2
ported 2g manifold
ported 02 housing
2g throttle body elbow
plam m100 with mmcd for logging car
kyb gr2's with H&R springs
autometer boost guage on pillar
3'' custom intake
2.5'' UICP with modded 1g blow off valve
MBC currently running 15 psi never higher since rebuild
possibly forgetting some stuff
Things worth noting:
clearcoat is chipped a bit on passenger side near window
fabricated UICP has some small boost leaks
front brakes are >5%, but will be replaced before sale
located in Calgary
Asking new price SACRIFICE 5200 or I will be trading it in, over 3500 invested in the past few months