FS. Amazing Selection of TURBO parts

[TylerH]

Updated deal:

Turbo Manifold
Downpipe
Intercooler
Wastegate
Blow Off Valve
Turbocharger
Injectors
Oil Sandwich
Exhaust
Fuel Management (ECU loaded with CROME w/harness)
Boost Gauge
Oil Pressure Gauge
Intercooler Piping
Gauge Bezel
Gaskets

All for $3,500, thats like throwing in the injectors and the turbo for free!




Well guys, after hand picking parts dating all the way back to Early July of last year, I'm forced to sell all my turbo parts. The plan was for the parts to go into the car a few months ago, but my job forced me to relocate and now I don't see a point in putting the parts in a car that will be driven every other weekend. I'd rather see the parts go to someone who could enjoy them much more.

Manifold, exhaust, and downpipe is for a 94+ Integra.

These parts are in great shape (I have cleaned up everything with a toothbrush and a towel) and I did an unbelievable amount of research in the selection of them. I would prefer to sell certain portions in kits, I'll post the details of that below.

All parts are still in boxes and ready to be picked up upon payment.

Thanks for looking guys.

Parts list:

- Inline Pro Cast Stainless Steel Manifold (Retail: $753.93 My Price: $415.00)
http://i61.photobucket.com/albums/h62/bajabeam/manifold_2.jpg
http://i61.photobucket.com/albums/h62/bajabeam/manifold.jpg

- Greddy Oil Catch Can (Retail:$130.90 My Price:$120.00)

- J&S Electronics Ultra Safeguard V2 (Retail: $623.03 My Price: $350.00)

- A'PEXi AVC-R Boost Controller (Retail: $623.03 My Price: $400.00)

- Zeitronix Zt-2 Wideband Air/Fuel Ratio Meter with EGT probe (Retail: $599.11 My Price: $510.00)

- Custom 3" Stainless Steel Downpipe (can keep power steering) (Retail: $376.33 My Price: $250.00)

- Blitz Dual DD Blow Off Valve (Retail: $250 My Price: 180.00)
http://i61.photobucket.com/albums/h62/bajabeam/blowoffvalve.jpg

- TiAL 38mm wastegate with polished cap (Retail: $270.61 My Price: $180.00)
http://i61.photobucket.com/albums/h62/bajabeam/wastegate.jpg
http://i61.photobucket.com/albums/h62/bajabeam/wastegate_2.jpg

- Precision SC34, 57 Trim, 0.63 A/R (no shaft play, checked this with engineering dept. at Garrett) (Retail: $1,038.38 My Price: $650.00)
http://i61.photobucket.com/albums/h62/bajabeam/SC34_02.jpg
http://i61.photobucket.com/albums/h62/bajabeam/SC34_01.jpg

- Blitz LM Front Mounted Intercooler (Anodized Black in town) (Retail: $1,283.81 My Price: $500.00)
http://i61.photobucket.com/albums/h62/bajabeam/frontshot.jpg


- RC Engineering 550cc Injectors (Retail: $479.54 My Price: $249.00)
http://i61.photobucket.com/albums/h62/bajabeam/injectors.jpg

- Walbro 255lph Fuel Pump (Retail: $132.16 My Price: $130.00)

- Golden Eagle Oil Sandwich (allows you to run oil press guage and turbo feed) (Retail: $163.62 My Price:$80.00)

- Golden Eagle Vacuum Manifold (allows clean and efficient routing of vacuum lines) (Retail: $67.90 My Price: $50.00)

- Thermal Research & Development 3" Stainless Steel Exhaust (Retail: $890.80 My Price: $500.00)

- C&R Racing Dual Core Half Sized Radiator w/ Spal Fan (Retail: $604.08 My Price: $299.00)
http://i61.photobucket.com/albums/h62/bajabeam/radiator_2.jpg
http://i61.photobucket.com/albums/h62/bajabeam/radiator.jpg

- Defi D-Gauge Mechanical Boost Gauge (Retail: $157.33 My Price: $120.00)

- Defi D-Gauge Electronic Oil Pressure Gauge (Retail: $250.47 My Price: $240.00)

- Custom Intercooler Piping (Hot side temp coated, cold side ceramic coated) (Retail: $700.00 My Price:$350.00)

- Autometer 2 gauge bezel (Retail: $88.10 My Price: $50.00)

- Spoon B18C5 Cam Gears (Retail: $390.18 My Price: $240.00)

- 3 Stainless Steel V Band Connectors (3") (Retail:$225.00 My Price: $150.00)
http://i61.photobucket.com/albums/h62/bajabeam/V-Band.jpg

Wow! Thats a mouth full and took a good while to type out, lol.

Okay so the kit portion of that would be pieces that would make sense to be sold together. This would be:

- Turbocharger
- Downpipe
- Exhaust
- Manifold
- Wastegate
- BOV

I'll try and add more pictures when I get a chance, the pics with them on the car is from the guy I had bought a few parts from.

If you are interested in the kit, or any of the parts (prices are OBO and if bought in a kit the price can be lowered a fiar amount), please don't hesitate to contact me at tholdner_at_gmail_dot_com. I'll be able to contact you immediately as I'm chained to a computer all day.

Thanks guys!

[honda/teg]

Original Post Removed. (Please read the Forum Rules and Terms of Use (http://forums.beyond.ca/articles.php?action=data&item=1) before posting again, or risk getting banned).

[TylerH]

$250 for 3" stainless downpipe? I thought that was a pretty fair price.

I can go $200 but I assure you that if it were bought as a kit, the price for all parts would be significantly lower. I have seen similar units go for $250 USD on H-T before so that is what my pricing is based off.

I appreciate your interest, and if you see any other prices that seem out, please let me know so I can adjust.

[honda/teg]

the exaust is really good and injectors but half rad and manifold r a bit high i know because i just purchased a kit for my b series and have done alot of research on it

[TylerH]

The Inline Pro Manifold is $600 USD, it's not just any manifold, but regarded as the best log manifold you can buy for a B-series motor. The placement of the wastegate allows for quick and efficient discharge of exhaust gases which will prevent cylinder reversion. I'll stop with my engineering babble, but this is the real deal.

Also, the C&R is at what I feel is a good price as well. C&R is known for making high quality racing radiators (for some Nascar entires) and the price I'm offering I feel is fair.

I have done far too much research into these parts and I'm confident this is one of the best pre-assembeld kits you could buy with absolutely everything included. I believe the quality of the parts is reflected in the price, as this isn't SS Autocrome or some other sub-par distributer.

[LilDrunkenSmurf]

Those cams will fit on any b series vtec engine, correct?

[downtime]

Your prices are high,pm me a price for the turbo,injectors,and intercoler.

[Noremac]

I'm interested in all three v-bands. Pm me with your best price.

Thanks

...Cameron

[Noremac]

??? Any updates?
...Cameron

[TylerH]

Sorry guys I was moving, PM's replied to.

[mo_money2supe]

PM'd

[TylerH]

PM's replied to

[Noremac]

pm'd again.


...Cameron

[IntegraG2]

pm'd

[drastik]

Awesomely written and photographed post.
If I had a b-series still, I'd be hitting you with a PM asap.

Bump for what seems to be a great for sale post!

[TylerH]

Thanks for the comments.

Weekend bump! :)

[Noremac]

Were you going to get back to me?

...Cameron

[TylerH]

Bump, start your fall project with some good quality parts!

[SR240SX]

Is the back of that turbo a 5 bolt or 4 bolt flange..looks like 5 to me but i might be wrong?..if its 4 i am very interested so let me know thanks!

[TylerH]

Sorry she's a 5-bolt

[Dim_Sum]

Is the wastegate still available?

[TylerH]

Bump for replied PM's, seems like fall makes people interested in turbo setups :thumbsup:

[TylerH]

Bump! Still for sale guys.

[Mazstyle]

Original Post Removed. (Please read the Forum Rules and Terms of Use (http://forums.beyond.ca/articles.php?action=data&item=1) before posting again, or risk getting banned).

[TylerH]

The price for the unit is $400 + the $77 EGT probe. so thats $477.00 + tax + shipping to get it here (came to $600 CAD at the time). I also paid that while the exchange rate wasn't so hot.

If you are interested in the parts I am more than willing to negotiate and be reasonable with the pricing.

These parts are just sitting around in boxes and it would be nice to have them gone to someone who will use them.

Thanks for the interest.

[TylerH]

Okay guys, winter is over and it's time for spring. I'm actively selling the parts again :) You still have time to do your install before the snow melts!

[B20EF]

pm'd

[TylerH]

Weekend Bump!

[TylerH]

bump

[TylerH]

Wow great weekend for inquiries, PM's replied to!

[TylerH]

Bump!

[TylerH]

Updated deal:

Turbo Manifold
Downpipe
Intercooler
Wastegate
Blow Off Valve
Turbocharger
Injectors
Oil Sandwich
Exhaust
Fuel Management (ECU loaded with CROME w/harness)
Boost Gauge
Oil Pressure Gauge
Intercooler Piping
Gauge Bezel
Gaskets

All for $3,500, thats like throwing in the injectors and the turbo for free!