FS: Bell Satellite Dish ( High Def. Ready )....

[Takahashi]

I have a Bell satellite dish with two LNB's and two SW21 switches, it's set up and ready for either a 4 reciever house-hold or for a pair on combination of 9200 HD PVR Recievers, the dish has only been used for a couple months....

http://members.shaw.ca/matrix9eleven/dish1.JPG

http://members.shaw.ca/matrix9eleven/dish2.JPG

If you have any questions i will most likely be able to answer them....

Break Down of prices per part;

2x LNB = $160 ($80ea.)
Dish = $60
SW21 Switches = $100 ($50ea.)

Total = $320 Purchased Seperately in a store

All you would need is to have the dish installed and tuned to the bell satellite(s) and a reciever, a reciever can run you anywhere from $50-$650 depending on options and quality....


I'm asking $180 for the works....

[megavolt]

Wow... where are you getting those prices from?

[Takahashi]

Originally posted by megavolt
Wow... where are you getting those prices from?
thats the retail price at the shop?...

i'm 90% sure i got the SW21's wrong though....

IF you bought the dish and one LNB in a package, everything alone will cost around $270'ish however....

[sabad66]

How does this work with 4 recievers? Do you mean 2 recievers would have 91 and 2 would have 82 or are they quad LNBs?

[Takahashi]

Originally posted by sabad66
How does this work with 4 recievers? Do you mean 2 recievers would have 91 and 2 would have 82 or are they quad LNBs?
no, you would have 2 line's comming off of each LNB totalling 4line's, if you point the dish to satellite 91 both LNB's will read satellite 91, you only use satellite 82 if your wanting the HD channels, so if your only needing the non-HD channels you can set it to 91....

IF you want the HD channels you can run a total of two HD recievers off the LNB's, but depending on what reciever you purchase, such as the bell 9200, you could run a back feed off the first reciever and use the number "2" remote to have different channels displayed on each TV while only using one remote....

long story short, if your using non-HD recievers each one needs only one line (91) to each reciever, if your using HD you need two, one 91 and one 82....

i hope that explained a little?...

[megavolt]

You've got it all wrong... You can't point both LNBs at 91... they're offset. When you're pointed at 91 with one LNB you'll be pointed at 82 with the other. So if you run the lines directly to the receivers you'll have 2 reading 91 and 2 reading 82. You'd need a SW-44 switch to get 4 receivers... whether you're picking up just 91 or both.

[dsmturbo]

And a SW64 for HD

[megavolt]

SW44 is fine for HD... that's a 4 in (2 from each LNB), 4 out. SW64 is for Dish... 6 in (2 from 3 LNBs), 4 out.

[Takahashi]

Originally posted by megavolt
You've got it all wrong... You can't point both LNBs at 91... they're offset. When you're pointed at 91 with one LNB you'll be pointed at 82 with the other. So if you run the lines directly to the receivers you'll have 2 reading 91 and 2 reading 82. You'd need a SW-44 switch to get 4 receivers... whether you're picking up just 91 or both.
whoops, my bad....

regardless, this was off of a 9200 PVR system....

[Takahashi]

$150

[Takahashi]

* Bump *

$120

[g unit]

pm'd

[knightflt]

check bargain finder you can buy that dish two lnb's for $65.00 those sw21 are $10.00 each

[Takahashi]

Originally posted by knightflt
check bargain finder you can buy that dish two lnb's for $65.00 those sw21 are $10.00 each
oh well, i'm firm on the price....

plus these are the new model dishes, and this particular one is only a few months old....

[dsmturbo]

It might be worth that if you included the actual SW44 switch which it should have come with for HD>

[Takahashi]

Originally posted by dsmturbo
It might be worth that if you included the actual SW44 switch which it should have come with for HD>
i have one with an SW44 switch, but 2x SW21's do the EXACT same thing basically, minus needing to have a power supply inline with the reciever....

[Takahashi]

$100 FIRM

[Takahashi]

* Bump *

$80FIRM

2x Available

[wontonjohnny]

still for sale?

[j3rry]

u cant recieve PM. still available? pm me

[spikerS]

Originally posted by wontonjohnny
still for sale?

a year later?

Originally posted by j3rry
u cant recieve PM. still available? pm me

did you even LOOK at the dates? nothing like bumping a 3 year old FS ad.




:nut: