PDA

View Full Version : FS: Cisco CCNA/CCNP Equipment - Routers and Switch - Complete Lab



Pacman
07-17-2007, 10:23 PM
I am posting this For Sale ad on behalf of a friend. Please contact him at [email protected] if you have any questions about the equipment.

The following Cisco routers and switch are no longer required for CCNA/CCNP study and are up for sale. I'd like to pass along a good deal to someone in need of hands on practice. I have a pile of console, serial, and ethernet AUI's as well - enough to get a nice home lab up and running. Of note is the Cisco 2511 Access Router which will allow you to connect up to 16 console connections at a time via reverse telnet. I'm not looking to part this package out at this time. For all equipment I'm looking to get only $575.00

The following devices are included. Six are fully operational and two non functional which I suspect require new RAM. If you want the non functioning devices great, if not the price is the same. I giving them away as part of the package, someone may have the time to fiddle with them, I don't. Again, the price is $575.00

Please email [email protected] for pictures if required. I want this equipment gone by the weekend.

Cisco 1605R

cisco 1605 (68360) processor (revision C) with 23733K/843K bytes of memory.

Processor board ID 08435419, with hardware revision 00000000

Bridging software.

X.25 software, Version 3.0.0.

2 Ethernet/IEEE 802.3 interface(s)

System/IO memory with paAM onboard 16384K bytes of DRAM on SIMM

System running from RAM

7K bytes of non-volatile configuration memory.

16384K bytes of processor board PCMCIA flash (Read/Write)



Cisco 2611

cisco 2611 (MPC860) processor (revision 0x202) with 49152K/16384K bytes of memory.

Processor board ID JAD04010J22 (1827728703)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

Basic Rate ISDN software, Version 1.1.

2 Ethernet/IEEE 802.3 interface(s)

1 Serial network interface(s)

1 ISDN Basic Rate interface(s)

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)



Cisco 2611

cisco 2611 (MPC860) processor (revision 0x202) with 49152K/16384K bytes of memory.

Processor board ID JAD04010J22 (1827728703)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

Basic Rate ISDN software, Version 1.1.

2 Ethernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

1 ISDN Basic Rate interface(s)

32K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

Main memory size: 64 MB.

Available main memory starts at 0x10000, size 65472KB

IO (packet) memory size: 20 percent of main memory.

NVRAM size: 32KB



Cisco 2511

cisco 2511 (68030) processor (revision C) with 16384K/2048K bytes of memory.

Processor board ID 01455401, with hardware revision 00000000

Bridging software.

SuperLAT software copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

, BFE and GOSIP compliant.

1 Ethernet/IEEE 802.3 interface(s)

2 Serial network interface(s)

16 terminal line(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read ONLY)



Cisco 2514

cisco 2500 (68034336K/2048K bytes of memory.

Processor board ID 01502972, with hardware revision 00000000

Bridging software.

X.25 software, Version 3.0.0.

SuperLAT software (copyright 1990 by Meridian Technology Corp).

TN3270 Emulation software.

2 Ethernet/IEEE work interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read ONLY)



Cisco 2522

NOT FUCTIONING Prob. requires new RAM



Cisco 2501

NOT FUCTIONING Prob. requires new RAM



Cisco 2514

cisco 2500 (68030) processor (revision L) with 2048K/2048K bytes of memory.

Processor board serial number 01904066

Bridging software.

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.

Primary Rate ISDN software, Version 1.0.

2 Ethernet/ network interfaces.

32K bytes of non-volatile configuration memory.

4096K bytes of processor board System flash (Read ONLY)



Cisco Catalyst 2912

Cisco Internetwork Operating System Software

IOS (tm) C2900XL Software (C2900XL-H2S-M), Verson 11.2(8.2)SA6, MAINTENANCE INTERIM SOFTWARE

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Wed 23-Jun-99 17:48 by boba

Image text-base: 0x00003000, data-base: 0x002432D0


Initializing C2900XL flash...

flashfs[5]: 171 files, 4 directories

flashfs[5]: 0 orphaned files, 0 orphaned directories

flashfs[5]: Total bytes: 3612672

flashfs[5]: Bytes used: 1828864

flashfs[5]: Bytes available: 178808

flashfs[5]: flashfs fsck took 6 seconds.

flashfs[5]: Initialization complete.

...done Initializing C2900XL flash.

C2900XL POST: System Board Test: Passed

C2900XL POST: CPU Buffer Test: Passed

C2900XL POST: CPU Notify RAM Test: Passed

C2900XL POST: CPU Interface Test: Passed

C2900XL POST: Testing Switch Core: Passed

C2900XL POST: Testing Buffer Table: Passed

C2900XL POST: Data Buffer Test: Passed

C2900XL POST: Configuring Switch Parameters: Passed

C2900XL POST: Ethernet Controller Test: Passed

C2900XL POST: MII Test: Passed

cisco WS-C2912-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory.

Processor board ID 0x0D, with hardware revision 0x01

Last reset from power-on


Processor is runnig Enterprise Edition Software

Cluster member switch capable

12 Ethernet/IEEE 802.3 interface(s)


32K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Adress: 00:30:19:33:17:40

Motherboard assembly number: 73-3397-07

Power supply part number: 34-0834-01

Motherboard serial number: FAA03399PEP

Power supply serial number: NONE

Model reision number: A0

Model number: WS-C2912-XL-EN

System serial number: FAA0340G0NS

cityhunter2501
07-18-2007, 09:37 AM
ygpm

cityhunter2501
07-18-2007, 10:08 PM
one of the Cisco 2611 flash didnt have any IOS in it, but got everything to run.

thanks pacman and kelly, this will help me with my studies and certificate exams:thumbsup: