View Full Version : licence plate location r1
theken
08-26-2007, 03:59 PM
where can i put my license plate on my 02 r1? has the underbody signals so i cant go right under the tail light, is there anywhere else to put it?
is it something like this
http://www.1tail.com/cartimages/16161a1.jpg
Just drill 2 small holes under it, and stick the plate there, the signals already are illegal, so might aswell make the plate match
You can buy a fender Elim for about $100 or you can go to rona and get 2 L brackets, some bolts/nuts and make one yourself, This is how mine used to look, It is a little more back now...
http://img167.imageshack.us/img167/7161/plate1ja6.th.jpg (http://img167.imageshack.us/my.php?image=plate1ja6.jpg)
theken
08-26-2007, 04:51 PM
yeah thats pretty much how it is, should i get self tapping screws or drill and put bolts in
I just took of the plate and measured the holes in the undertail first, and marked them with a black marker, then I drilled the holes out, just big enough for the screw to go through
Put some nuts on the screws and it as good, you can also use the L brackets, to make it stick out more, and be less heat with the cops
theken
08-26-2007, 06:02 PM
yeah i bought some little L brackets, i will see what i can do tonight, stupid rain
Yah i went riding because it stopped for a little bit, but it poured on us :(
Make sure you don't put the plate to close to the rear tire with the L brackets or its going to hit and bend the crap out of your plate.
theken
08-26-2007, 09:01 PM
yeah i got some tiny tiny brackets like 1 inch, shouldn't be a problem
cdulm
08-26-2007, 11:58 PM
Originally posted by Kobe
is it something like this
http://www.1tail.com/cartimages/16161a1.jpg
Just drill 2 small holes under it, and stick the plate there, the signals already are illegal, so might aswell make the plate match
You can buy a fender Elim for about $100 or you can go to rona and get 2 L brackets, some bolts/nuts and make one yourself, This is how mine used to look, It is a little more back now...
http://img167.imageshack.us/img167/7161/plate1ja6.th.jpg (http://img167.imageshack.us/my.php?image=plate1ja6.jpg)
Where abouts did you place your turn signals? Maybe Im blind but I couldnt see any from the picture :dunno:
They are where the brake light is...
it works something like this
http://clearalternatives.com/Merchant2/graphics/00000001/CTL-0060-IT.gif
Palmiros
08-27-2007, 12:52 AM
Originally posted by Kobe
They are where the brake light is...
it works something like this
http://clearalternatives.com/Merchant2/graphics/00000001/CTL-0060-IT.gif
so you basically don't have a brake light? or how does it work? half signal half brake?
theken
08-27-2007, 01:14 AM
the turn signals are the little amber lights underneath the brake light, about 6 inches back
The brake light still works, its like 2 in 1 practically, a lot of bikes have it, but it is not 100% legal, I have not gotten a ticket for it though
theken
08-27-2007, 08:15 PM
my brake light doesnt have signals in it at all, they are underneath the body, i mounted my plate under the exhaust hanger, drilled a hole in the plate and put a couple bolts through it, with lock washers, looks alright
theken
08-29-2007, 12:55 AM
man my plate fell off or something haha, guess the lock washers didn't do there fucking job. if anybody sees my plate on deerfoot or glenmore, i lost it tonight, from around 130th ave till glenmore then glenmore to the french maid. bc817, i already reported it lost to the police but if anyone se it lemme know so i can go get it and not have to pay another 90 dollars
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.