save to pull oil for turbo supply on honda d16

[white99]

where's the save to pull oil for turbo supply on honda d16

[ca18det240sx]

t off your oil pressure switch.

[Honda_002]

yeah i think its a 1/8" tee on honda's, you can get erol's (i believe) from mopac

[ca18det240sx]

Its 1/8" bpt on nissan...so im assuming it prolly is with honda as well. The way to make a 1/8 NPT fitting work on it, is to get that tap, cover teh tap in grease, like wheel bearing grease or something,and run the tape thru it, the threads between 1/8 BPT and 1/8 NPT is so close youll barely take any material out. The grease will trap all teh filings, just be sure to clean it off and regrease half way thru.

[Mr_ET]

stealthmode kit:thumbsup:

[racin_jayson]

you can get a 1/8 bspt to 1/8npt adapter from mopac, made by autometer, then tee it, or run a sandwich plate at the oil filter.

[white99]

it,s 1/8 bpt on honda if i run a sandwich will i still have the same amount of oil pressure going to the turbo