canadianskyline
09-18-2007, 10:22 PM
Ok, so I got big plans for winter again, and a whole bunch of car stuff laying around right now. I bought a gts4 to fix for a DD and im recouping some money outta that by selling parts, i got parts from parts cars I've had for a while. And I'm selling a bunch of junk off of my car to make room for bigger and better things. Also, buying my **** will help me get to D1GP Driver Search in November (irwindale). So ya, any sponsors want their name on my car in exchange for tires, lmao....??
Now not all of these things will be available right now. My car will be off the road in about another month so at that point everything is up for grabs.
Ok, so here goes. There's probably something for everyone here.
All prices are OBO, and don't include shipping. I'm pretty flexible on some of this stuff.
NEO 6 RB25 SWAP
$3000
This is an r34 neo engine that has been fitted with a regular rb25 camshaft, crank angle sensor, maf, throttle body, and ecu. It was installed and wired by autodream and was known to have approx. 50 000 km on it. It still has the NEO turbo on it (steel wheeled very good turbo) and it has an rb25 transmission on it as well. It comes with the front driveshaft, full wiring harness, upper rad hose, ecu and anything else you will need to swap it into your r32 gtst. It has been already wired for use in an HCR32 so it will be a direct swap for you to convert to the rb25. Sell your rb20 for 1000 bucks and you're into an rb25 for a really good price.
I can also install it for an extra charge. I compression tested the motor and it did 155 all the way across (within 1 or 2 psi).
http://img483.imageshack.us/img483/3365/img8446pr8.jpg
MY SEXCORE BLITZ WHEELS no tires
$1400
Fronts are 17x9+15 and rears are 18x10 +45. The rears can use a spacer if you are going for the flush drift look, but if you want to run some fat tires sometimes it's nice to be able to. You can run a 265 on a gts with a minor fender roll with the rears. The colours of the centers dont quite match 100% adn there is a small bit of curb rash on the rear 2. I can get more detailed pictures. I also have 2 17x8 +35 blitz's i can throw in for cheap if you want some spares. They are appart right now and need to be polished.
Rears
http://img333.imageshack.us/img333/2850/blitz4pc.jpg
How they fit with 15mm spacer.
http://img441.imageshack.us/img441/9372/77895499io5.jpg
On Car
http://img141.imageshack.us/img141/517/skyline180zw8.png
http://img166.imageshack.us/img166/9071/blueskyrineac1.jpg
TEIN TIE RODS FOR GTST (inner and outer)
$160
I ran these for 1 season. They were really good (lots more angle) or just good to have if you are putting new ones in anyway. The sphericals in them are still really stiff (hard to move) which is a good sign that they haev a ton of life left. These wont be available for a month or so. Im selling because I got some new peak performance ones that will let me get rid of some bump steer.
http://img175.imageshack.us/img175/5577/tierodsut4.png
CARBON GT WING
$200
Anyway, not sure if anybody wants it, it's in pretty much mint shape, im putting a gtr wing on the car instead.
http://img222.imageshack.us/img222/4012/img8473hv6.jpg
RECARO DRIVERS SEAT AND RAIL
$300
It has a couple tears on it but other than that its in good shape, would be easy to stitch up or just put black tape over.
http://img502.imageshack.us/img502/3238/img8463vh8.jpg
http://img502.imageshack.us/img502/9861/img8464aa5.jpg
APEXI RED/CARBON STB
$150
It's an apexi front strut tower bar. It's red and carbon fiber. Fits GTS/GTR.
OMORI OIL FILTER RELOCATION KIT
$150
NISMO FPR (factory position)
$120
http://img222.imageshack.us/img222/5291/img8457mf9.jpg
NISMO STB
$130
http://img483.imageshack.us/img483/3365/img8446pr8.jpg
Now not all of these things will be available right now. My car will be off the road in about another month so at that point everything is up for grabs.
Ok, so here goes. There's probably something for everyone here.
All prices are OBO, and don't include shipping. I'm pretty flexible on some of this stuff.
NEO 6 RB25 SWAP
$3000
This is an r34 neo engine that has been fitted with a regular rb25 camshaft, crank angle sensor, maf, throttle body, and ecu. It was installed and wired by autodream and was known to have approx. 50 000 km on it. It still has the NEO turbo on it (steel wheeled very good turbo) and it has an rb25 transmission on it as well. It comes with the front driveshaft, full wiring harness, upper rad hose, ecu and anything else you will need to swap it into your r32 gtst. It has been already wired for use in an HCR32 so it will be a direct swap for you to convert to the rb25. Sell your rb20 for 1000 bucks and you're into an rb25 for a really good price.
I can also install it for an extra charge. I compression tested the motor and it did 155 all the way across (within 1 or 2 psi).
http://img483.imageshack.us/img483/3365/img8446pr8.jpg
MY SEXCORE BLITZ WHEELS no tires
$1400
Fronts are 17x9+15 and rears are 18x10 +45. The rears can use a spacer if you are going for the flush drift look, but if you want to run some fat tires sometimes it's nice to be able to. You can run a 265 on a gts with a minor fender roll with the rears. The colours of the centers dont quite match 100% adn there is a small bit of curb rash on the rear 2. I can get more detailed pictures. I also have 2 17x8 +35 blitz's i can throw in for cheap if you want some spares. They are appart right now and need to be polished.
Rears
http://img333.imageshack.us/img333/2850/blitz4pc.jpg
How they fit with 15mm spacer.
http://img441.imageshack.us/img441/9372/77895499io5.jpg
On Car
http://img141.imageshack.us/img141/517/skyline180zw8.png
http://img166.imageshack.us/img166/9071/blueskyrineac1.jpg
TEIN TIE RODS FOR GTST (inner and outer)
$160
I ran these for 1 season. They were really good (lots more angle) or just good to have if you are putting new ones in anyway. The sphericals in them are still really stiff (hard to move) which is a good sign that they haev a ton of life left. These wont be available for a month or so. Im selling because I got some new peak performance ones that will let me get rid of some bump steer.
http://img175.imageshack.us/img175/5577/tierodsut4.png
CARBON GT WING
$200
Anyway, not sure if anybody wants it, it's in pretty much mint shape, im putting a gtr wing on the car instead.
http://img222.imageshack.us/img222/4012/img8473hv6.jpg
RECARO DRIVERS SEAT AND RAIL
$300
It has a couple tears on it but other than that its in good shape, would be easy to stitch up or just put black tape over.
http://img502.imageshack.us/img502/3238/img8463vh8.jpg
http://img502.imageshack.us/img502/9861/img8464aa5.jpg
APEXI RED/CARBON STB
$150
It's an apexi front strut tower bar. It's red and carbon fiber. Fits GTS/GTR.
OMORI OIL FILTER RELOCATION KIT
$150
NISMO FPR (factory position)
$120
http://img222.imageshack.us/img222/5291/img8457mf9.jpg
NISMO STB
$130
http://img483.imageshack.us/img483/3365/img8446pr8.jpg