FS/FF: Honda/Nissan/Misc Parts

[rc2002]

Everything cleared out. Stay tuned for a new thread.

Stuff Sold/Given Away:
1 Set of D Series Axles
Momo Steering Wheel Hub for Integra
98 Civic Front Bumper
Honda Resistor Box
Exedy Stage 1 Clutch
Complete 2001 Integra 4 disc brake conversion
EK9 Ebrake cables
2nd Set of D Series Axles
OEM ITR Flywheel
JDM P30 ECU (1992-1995 5-SP B16A2)
Premium Pearl White Trunk Lid (has spoiler holes)
JL Audio 10W1 subwoofer
Brand new OEM Left Signal Light
Brand new OEM Right Signal Light (Amber DIY removed)
Infiniti G35 Coupe headlight assemblies with a couple of broken tabs (no bulbs or ballasts)
EK Mud Flaps
94-01 Integra Axles from A-1 Honda
ITR Rear Lower Control arms
16 x Buddy Club P1 Aluminum Racing Lugs (bronze colour)
S14 A/C Condenser
SR20 Clutch Fan
Integra rear sway bar with endlinks
EK OEM Honda Passenger Side Headlight
2001 Integra GS Intermediate Shaft
1999 Integra GSR Intermediate Shaft
New Generic Brand Clutch for D16Y7
Matched flywheel to above clutch
Freshly machined OEM ITR front rotors
Stock Springs from a 2001 GS
ITR Front Upper Control arms

[silviaformulaD]

dose the rb20 clutch work for a rb25.

[euro_racer]

pm'd

[rc2002]

Yes the clutch will work for an RB25.

PM's replied. List updated.

[LilDrunkenSmurf]

Will the GS rear sway fit an EG w/ no modifications to the LCA? Would it need a subframe brace?

[mo_money2supe]

Originally posted by LilDrunkenSmurf
Will the GS rear sway fit an EG w/ no modifications to the LCA? Would it need a subframe brace?

All you'll need are Integra LCAs (and endlinks obviously). And no, the subframe won't need bracing; only when you go ITR diameter and up would a brace be necessary.

EDIT: To clarify, they don't NEED to be 'Teg LCAs, Civic ones will work too if they have LCAs that have sway bar mounts. However, only the 4-door EX's or the American EX Coupes came from factory with rear sways on the EGs. Your Si, on the other hand, didn't, so you'll need new LCAs.

[rc2002]

^ Thanks Simon.

A bunch more items sold. Some prices updated. Pending sales in red. Free items are going to the dump soon.

[LilDrunkenSmurf]

Thanks for the ECU richard :bigpimp:

[Lucky97]

will the d16y7 clutch work on a d16y8?

[rc2002]

Yes

[DelSoln]

Pics of the OEM ITR Red Recaro Alcantara Seat Covers?

[03ozwhip]

are the ITR rotors bigger than the regular integra rotors? are they a direct fit?i dont know much about integras. asking for a friend. if theyre direct fit, theyre sold.

[rc2002]

I'll get pics of the seat fabric.

I've gotten a few questions about rotor fitment now.
Type-R = 5 bolt pattern.
Non Type-R = 4 bolt pattern.

Rotors will only work on Type-R.

[rc2002]

[rc2002]

[rc2002]

[RobynLuu]

pm'd

[BrknFngrs]

The mud flaps are the little ones right behind the front wheels right Richard? OEM ones?

[rc2002]

Yup those are the ones. OEM.

[rc2002]

[rc2002]

S14 stuff all gone

[dj_honda]

richard if you still have the ITR rotors i'll take them.

[RobynLuu]

Hey do you still have the passenger side headlight?

[RobynLuu]

pm'd

[rc2002]

Headlight is gone.

[CRXguy]

Richard,

Still have the mudflaps for the CRX?

Thanks.

[rc2002]

Yup still have them. They're the front ones only.

[rc2002]

Both 94-01 Integra Intermediate shafts are sold. List updated.

[rc2002]

Clutch and flywheel are gone. Pending deal on rotors.