TurboD
04-12-2008, 05:32 PM
i have 3 parts for sale, all interior related, all fit together.
important note: i dont have hardward for the wheel or quick release, you must locate allan bolts for both of these items yourself, i dont personally know where to get a set.
if someone wants to buy them all as a package deal, all three, the price is 200$
now for each description:
Isotta Sequential Shift Light with BONUS Lap Timer- 60$
first i will explain what this is, most people have never seen one. its an italian device make by isotta and it bolts between the wheen and the hub (or wheel and quick release). its purpose is to approximate shifts using a sequence of LED lights.
it works off of a small phone cord (its a mini connector) and plugs into the lower cluster area into a phone jack type plug (that i will also include)
it taps into the rpm wire in the cluster along with a positive and negative wire.
it has a small calibration screw on the electronic board that adjusts where the lights are in relation to the RPM.
important information: the reason im selling is because it collects dusts, but when i had it i rarely used it as i don't have any tool that is precise enough to adjust the little screw on the board to set the rpms.
that and the phone cord kept getting wraped around and caught in my hub.
but it works, it works just fine and is cool for just a little touch on a car, something no one else has.
but i dont suggest buying it to use as a reliable shift light.
it would require some tuning to become a reliable shift light.
i have 2 spare electronics board for the unit, both are included with the part, so you get 3 boards all working. so if there is any issues with the unit you can simply replace the board with a new one. all 3 work fine, one might be missing an adjuster.
i payed a lot of extra money to order spare boards from italy.
also as you can see in the pictures, i have an electronics board that is a lap timer, includes a power and ground wire that i would assume you hook into a switch and mount in the car (i dont have the case for it, just the board) and you can use the unit as an in car lap timer.
if you are a diy person you could easily fab it into your dash or something like this. this board has never been used.
http://www.modelexis.com/beyond/sale1/DSCF0943.jpg
http://www.modelexis.com/beyond/sale1/DSCF0942.jpg
MOMO Apache Steering Wheel - 120$
a few years old, has had quite a bit of use, still in very good condition. really not any noticable wear. you must consider its a few years old, but there is no wear worth mentioning, see pictures.
http://www.modelexis.com/beyond/sale1/DSCF0938.jpg
http://www.modelexis.com/beyond/sale1/DSCF0940.jpg
NRG Quick Release- SOLD
http://www.modelexis.com/beyond/sale1/DSCF0947.jpg
im not too flexible on the prices, no low ballers, no trades.
pm me if interested.
-Dan
important note: i dont have hardward for the wheel or quick release, you must locate allan bolts for both of these items yourself, i dont personally know where to get a set.
if someone wants to buy them all as a package deal, all three, the price is 200$
now for each description:
Isotta Sequential Shift Light with BONUS Lap Timer- 60$
first i will explain what this is, most people have never seen one. its an italian device make by isotta and it bolts between the wheen and the hub (or wheel and quick release). its purpose is to approximate shifts using a sequence of LED lights.
it works off of a small phone cord (its a mini connector) and plugs into the lower cluster area into a phone jack type plug (that i will also include)
it taps into the rpm wire in the cluster along with a positive and negative wire.
it has a small calibration screw on the electronic board that adjusts where the lights are in relation to the RPM.
important information: the reason im selling is because it collects dusts, but when i had it i rarely used it as i don't have any tool that is precise enough to adjust the little screw on the board to set the rpms.
that and the phone cord kept getting wraped around and caught in my hub.
but it works, it works just fine and is cool for just a little touch on a car, something no one else has.
but i dont suggest buying it to use as a reliable shift light.
it would require some tuning to become a reliable shift light.
i have 2 spare electronics board for the unit, both are included with the part, so you get 3 boards all working. so if there is any issues with the unit you can simply replace the board with a new one. all 3 work fine, one might be missing an adjuster.
i payed a lot of extra money to order spare boards from italy.
also as you can see in the pictures, i have an electronics board that is a lap timer, includes a power and ground wire that i would assume you hook into a switch and mount in the car (i dont have the case for it, just the board) and you can use the unit as an in car lap timer.
if you are a diy person you could easily fab it into your dash or something like this. this board has never been used.
http://www.modelexis.com/beyond/sale1/DSCF0943.jpg
http://www.modelexis.com/beyond/sale1/DSCF0942.jpg
MOMO Apache Steering Wheel - 120$
a few years old, has had quite a bit of use, still in very good condition. really not any noticable wear. you must consider its a few years old, but there is no wear worth mentioning, see pictures.
http://www.modelexis.com/beyond/sale1/DSCF0938.jpg
http://www.modelexis.com/beyond/sale1/DSCF0940.jpg
NRG Quick Release- SOLD
http://www.modelexis.com/beyond/sale1/DSCF0947.jpg
im not too flexible on the prices, no low ballers, no trades.
pm me if interested.
-Dan