Ghettobaby
06-19-2008, 09:33 PM
Well the time has come for me to move on, so I am parting some stuff that I do not see myself using or install anytime soon.
Lets start with the stroker, there is more than 8grand in parts and labour invested, eveything is brand new, engine is sitting in its crate in my parents garage:
3S block, torque plate bored, honed, deglazed, vatted, cleaned, painted red, assembled
5S crank destroked to 3S rod sizes, balanced with rotating assembly, micropolished
King Engine Bearings & Thrust Washers
CP 86.5MM forged stroker pistons, 9.0:1 compression, 020 over bore
Eagle H-Beam Rods
New OEM oil strainer, real seal & rear seal retainer
MCS New OEM Shimmed Oil Pump w/ front main seal
ARP Head studs
Cometic MLS HG
Greddy timing belt
OEM timing belt tensioner
MCS STAGE II Super Flow 3S Head
1mm OS Competition Plus Valves, keepers, locks, bronze guides, TI retainers
Dual valve springs
Blitz 264 cam
1ZZ Shimless buckets
HKS Cam Gears
http://img2.putfile.com/main/6/17101014696.jpg
http://img2.putfile.com/main/6/17101014656.jpg
http://img2.putfile.com/main/6/17101014686.jpg
Conditionally Sold
I have a KU engineering Intake manifold complete with Q45 TB, TPS and Pigtail looking to get 500 OBO
Extreme boost CT26/35R this turbo was a limited edition thing, EB ended up loosing money in the production of these so they stoped (although for the right amount you can special order them).
CT26 casing
Full GT35R internals
Internally gated
Good until ~30 psi
Capable of 400-450 whp
Comes with Earls Bradided coolant lines, oil feed and return lines, and block adapters.
I have put less than 1000 km on this turbo.
http://www.extremeboost.com/specials/CT26-35R.htm
Asking 1100 OBO
CM FX400 6 puck clutch, bnib asking Sold
http://img2.putfile.com/main/6/17101014668.jpg
Greddy Spec2 Boost controller and turbo timer 300 for the pair
Billet Oil Filter Relocation kit $150
http://img2.putfile.com/main/6/17101014643.jpg
Blitz 850cc side feed injectors complete with adaptor collars to fit the gen 2 rail Sold
Horsepower Freaks AEM standalone kit:
AEM EMS
AEM Wideband o2 Kit with 2 1/16" gauge display
3.5 Bar AEM MAP Sensor
Intake Air Temp Sensor & Connector
GM Boost Control Solenoid & Connector
Asking 1500 OBO
Supra 550cc injectors Sold
Ats fpr and fuel rail Sold
BNIP Walboro fuel pump Sold
Berk Tech Intercooler Kit 300 obo
If you are interested in anything or want to discuss a package deal PM me or Call 993-4794
Tibi
Lets start with the stroker, there is more than 8grand in parts and labour invested, eveything is brand new, engine is sitting in its crate in my parents garage:
3S block, torque plate bored, honed, deglazed, vatted, cleaned, painted red, assembled
5S crank destroked to 3S rod sizes, balanced with rotating assembly, micropolished
King Engine Bearings & Thrust Washers
CP 86.5MM forged stroker pistons, 9.0:1 compression, 020 over bore
Eagle H-Beam Rods
New OEM oil strainer, real seal & rear seal retainer
MCS New OEM Shimmed Oil Pump w/ front main seal
ARP Head studs
Cometic MLS HG
Greddy timing belt
OEM timing belt tensioner
MCS STAGE II Super Flow 3S Head
1mm OS Competition Plus Valves, keepers, locks, bronze guides, TI retainers
Dual valve springs
Blitz 264 cam
1ZZ Shimless buckets
HKS Cam Gears
http://img2.putfile.com/main/6/17101014696.jpg
http://img2.putfile.com/main/6/17101014656.jpg
http://img2.putfile.com/main/6/17101014686.jpg
Conditionally Sold
I have a KU engineering Intake manifold complete with Q45 TB, TPS and Pigtail looking to get 500 OBO
Extreme boost CT26/35R this turbo was a limited edition thing, EB ended up loosing money in the production of these so they stoped (although for the right amount you can special order them).
CT26 casing
Full GT35R internals
Internally gated
Good until ~30 psi
Capable of 400-450 whp
Comes with Earls Bradided coolant lines, oil feed and return lines, and block adapters.
I have put less than 1000 km on this turbo.
http://www.extremeboost.com/specials/CT26-35R.htm
Asking 1100 OBO
CM FX400 6 puck clutch, bnib asking Sold
http://img2.putfile.com/main/6/17101014668.jpg
Greddy Spec2 Boost controller and turbo timer 300 for the pair
Billet Oil Filter Relocation kit $150
http://img2.putfile.com/main/6/17101014643.jpg
Blitz 850cc side feed injectors complete with adaptor collars to fit the gen 2 rail Sold
Horsepower Freaks AEM standalone kit:
AEM EMS
AEM Wideband o2 Kit with 2 1/16" gauge display
3.5 Bar AEM MAP Sensor
Intake Air Temp Sensor & Connector
GM Boost Control Solenoid & Connector
Asking 1500 OBO
Supra 550cc injectors Sold
Ats fpr and fuel rail Sold
BNIP Walboro fuel pump Sold
Berk Tech Intercooler Kit 300 obo
If you are interested in anything or want to discuss a package deal PM me or Call 993-4794
Tibi