2JZ-GTE Boost Gauge Set-up

[francisc006]

Im just wondering where I should be settign up my boost gauge on my stock 2JZ-GTE to get accurate readings (Please be specific)
Thanks in advance!


http://photos-f.ak.facebook.com/photos-ak-sf2p/v253/79/51/719380403/n719380403_988085_6660.jpg

[s3v3n]

youd usually tap a line coming from the im after the tb

[sr20s14zenki]

Find fuel pressure regulator, t into the vacuum to it, done.

[s3v3n]

Originally posted by sr20s14zenki
Find fuel pressure regulator, t into the vacuum to it, done.
personally not a fan of tapping fpr lines ... if something goes wrong with your gauge/line/tap/etc you can subsequently end up running lean.

my 2c :dunno:

[Supa Dexta]

It's probably the most common spot on the planet though. So do it right and don't worry.

[francisc006]

thanks!

[francisc006]

http://clubaristo.net/forums/attachment.php?attachmentid=732&d=1180255932

T-ed into the red arrowed line

[CelicaST-162]

You can Tee it into the Boost sensor aka MAP sensor, that's what I did with mine!