PDA

View Full Version : Finally....


redline
09-07-2003, 10:28 PM
I got off my ass and took the teg apart. (it only took two years) :dunno:

The end result: Broken ring lands in one and two and blown head gasket. :banghead:

Oh well, who wants to do a group buy on JE, Crower, darton, and ferrea! :D

I will get some pics up in the am!
Redlyne_mr2
09-07-2003, 10:55 PM
Originally posted by redline
I got off my ass and took the teg apart. (it only took two years) :dunno:

The end result: Broken ring lands in one and two and blown head gasket. :banghead:

Oh well, who wants to do a group buy on JE, Crower, darton, and ferrea! :D

I will get some pics up in the am!
Holly crap that happend when Beyond first started.
buh_buh
09-07-2003, 11:49 PM
whoa that was a long time ago.
Ed the SOHC
09-08-2003, 12:06 AM
holy, i was wondering what was going on with the "13sec street tire" killer. now that it's diagnosed how long is it gonna take you to get it out again.... 2 more years? hahaha j/k.
redline
09-08-2003, 07:37 AM
I am ordering rods, pistons, and sleeves today, so hopefully they dont take two years to get here!
legendboy
09-08-2003, 08:24 AM
you should consider a Benson block, $950 us. :thumbsup:
redline
09-08-2003, 09:46 AM
Originally posted by legendboy
you should consider a Benson block, $950 us. :thumbsup:

I am going to try and avoid the US for the block, but do they have a web site?
redline
09-08-2003, 09:47 AM
see its not there

http://www.baytex.ab.ca/kyle car/bay1.jpg

Piston

http://www.baytex.ab.ca/kyle car/piston2.jpg

Block

http://www.baytex.ab.ca/kyle car/block1.jpg


http://www.baytex.ab.ca/kyle car/block2.jpg
rage2
09-08-2003, 10:07 AM
Time to get Hondata or AEM :).
redline
09-08-2003, 10:18 AM
Originally posted by rage2
Time to get Hondata or AEM :).

Yeap just got to get the engine back together for right now and an AEM with injectors is going to be my xmas present to me!!
ls/vtec-crx
09-08-2003, 10:37 AM
Originally posted by redline
I am ordering rods, pistons, and sleeves today, so hopefully they dont take two years to get here!

I'll definately make sure they don't take 2 years.
HAHAHAHAHA!!!!:devil:
redline
09-08-2003, 04:12 PM
Originally posted by m10-power
What ever broke the parts need to be fixed as well, obvously detonation, did you investigate why?

over boosted, I had enough fuel for about 11psi and one pass down the track it boosted to 15.5psi went lean :banghead:
legendboy
09-08-2003, 04:16 PM
Originally posted by redline


over boosted, I had enough fuel for about 11psi and one pass down the track it boosted to 15.5psi went lean :banghead:

Sweet!! haha sounds like it was fun tho! :D
redline
09-08-2003, 04:37 PM
Yeah half way down the track i was thinking the car feels great tonite, it was pushing me back in the seat in third gear and then powershifted fourth , the power went away, looked down the J&S was solid red, EGTs were sky high, and the a/f gauge was in the red. I lifted and still ran a 14.1@102
stockEK
09-12-2003, 11:15 AM
Originally posted by legendboy
you should consider a Benson block, $950 us. :thumbsup:


The stock block is easily good enough for streetable power. Anything beyond 350 wheel isnt really useable on the street unless you have a drag setup (drag rads, traction bars drag biased suspension ect)

At that point, its not going to be much good for anything but a straight line. You may as well stuff a big block into a 1970 nova :)



Pretty cool that it is available though, how many aftermarket BLOCKS are available for different cars?