Noise?

[5oarer]

ok when i break i get a harse sqweek noise. i had all the break pads all done this year and have less then 20k on them, so i dont think its the break pads

like just lots of sqweeking when i break at slow speeds.

do u guys this its the cv joints?
maybe the rotars need to be turned?

[chkolny541]

replace the rotors, they are cheap

[Isaiah]

Break inspection is free at most garages. Take it in but make sure the inspection is free before you get it done. I would do that before you go and replace the rotors or any other part before confirming the problem.

[BlackArcher101]

Originally posted by chkolny541
replace the rotors, they are cheap

And that would prevent squeeking how? Really no need to replace or change rotors unless brakes are pulsing or the thickness is past it's minimum.

I've had this problem before... turns out the pads were heavily glazzed. I took them all off, cleaned with brake clean and the rotors as well and all was good.