PDA

View Full Version : FS: 95 Eagle Talon TSI AWD



Petey1
10-25-2008, 03:53 PM
I'm throwing my talon up for sale. I need some cash for school and something a little more practical. I know its a bad time to try and sell but its the right thing for me to do. All parts were put on with in the last 10k km or less.
-143XXX kms
-6 bolt block
-balance shafts removed
-solid motor mounts
-ARP head studs and MLS headgasket
-external oil cooler
-timing belt, oil pump, water pump, pulley's and tensioner replaced at about 131k km, new upper and lower rad hoses, thermostat
-DSM Link
-680cc injectors
-Walboro 255
-SS autochrome fmic kit
-Aeromotive afpr with ss return line
-B&M Inline FP gauge
-1g Throttle body & BOV recirc'd
-Taylor wires and new plugs
-Dejon hard intake pipe with K&N
-Megan Racing Down pipe and three inch full exhaust
-SS 2.5" o2 housing with atmospheric dump
-Autometer Cobalt series EGT and boost(30in.hg-30psi)
-NGK AFX wideband
-ACT 2600 clutch
-SS clutch line
-Synthetic fluids throughout
-Rebuilt bosch alternator put in Oct 23, 08(5 year warrenty)
-Battery less than six months old
-Slim rad fan
-60 Trim turbo with adjustable wastegate install Oct 18, 08 with ss feed line and an fp(i think) return line

I'm sure there's more but thats all I can remember now. Right now its set at 17lbs on the stock timing curve and a rich tune. With a good tune this set up will do 12s EASY.

The Bad
-I had the hood fly up on me so its pretty dented along with a few dents in the roof. But it now has a brandnew windshield and I have an extra hood(its maroon so it will need paint) for it that will be included.
-The two front rims are bent from the construction on glenmore bridge when they left about a three inch step in the pavement. I've got another set of rims that I'll throw in too, they're just the ugly 1g ones tho.
-Its got some idle issues but nothing too major.

And just so you know this was my daily so it didn't get beat on too hard. I think that's pretty much it. If you have any questions let me know.
Asking 9500
My cell is 403 831 0658
http://img147.imageshack.us/img147/5840/1000296xw8.th.jpg (http://img147.imageshack.us/my.php?image=1000296xw8.jpg)
http://img393.imageshack.us/img393/2118/1000297ry0.th.jpg (http://img393.imageshack.us/my.php?image=1000297ry0.jpg)
http://img293.imageshack.us/img293/152/1000294yd6.th.jpg (http://img293.imageshack.us/my.php?image=1000294yd6.jpg)
http://img236.imageshack.us/img236/3061/1000291vf8.th.jpg (http://img236.imageshack.us/my.php?image=1000291vf8.jpg)
http://img137.imageshack.us/img137/2617/1000292zs6.th.jpg (http://img137.imageshack.us/my.php?image=1000292zs6.jpg)
http://img232.imageshack.us/img232/5128/1000293qx0.th.jpg (http://img232.imageshack.us/my.php?image=1000293qx0.jpg)
http://img137.imageshack.us/img137/9564/1000290pz3.th.jpg (http://img137.imageshack.us/my.php?image=1000290pz3.jpg)
http://img511.imageshack.us/img511/1870/1000299ed0.th.jpg (http://img511.imageshack.us/my.php?image=1000299ed0.jpg)
http://img225.imageshack.us/img225/4403/1000298qp8.th.jpg (http://img225.imageshack.us/my.php?image=1000298qp8.jpg)

Petey1
10-30-2008, 11:47 PM
Now needs a clutch master cylinder.
MUST SELL
$7000 FIRM