PDA

View Full Version : FS: Built RB26 w/ Everything for BNR or S13



skylinegtr20
06-16-2009, 06:18 AM
Hey everyone,

I am putting my built RB26 for sale, this motor was originally built by Taylor & Sons in Southern Ontario. Originally owned by fellow member on GTRCanada I purchased this last spring but never ended up using it! I am changing cars and have no need for a RB26. It was originally in a S13 so I have the harness, engine mounts, RB25 oil pan, and modified exhaust manifold to fit this perfectly in your S-Chassis!

Many ontario members of gtrcanada can attest to the quality of this motor, Taylor & Sons, and the former member. I can forward contacts of other members with T&S built motors.

Engine:
3264kms on the motor, oil changes done with Royal Purple 5w40.

'89 RB26 Block (equlilant to N1 Block w/ higher nickel content.)
Machined Block, blueprinted, decked and hot tanked
Torque Plate used
Wiseco 87mm Pistons
Cryo Rods
ARP 2000 Rod Bolts
R33 Crankshaft
Nismo Bearings
ARP Head Bolts
N1 Oil pump
N1 Water Pump
Cometic Headgasket (87mm bore, 1.2mm thick)
Tomei Exhaust, Intake & Throttle Body Gaskets
Stage 3 Port & Polish
3 Angle Valve Job
Valve grind
Valve Seals
Valve Guides
850cc RC Injectors
HKS Fuel Rail
New OEM coilpacks
Brand New Greddy Intake Manifold
Brand New Holset HX35 Single Turbo
- High Interference Exhaust Wheel
- Garret .85A/R Exhaust Housing
XS Power Exhaust Manifold
Tial 44mm Wastegate
Screamer Pipe
Custom Downpipe (3” diameter)

Engine Management:
Power FC D-Jetro w/commander
1 Map Sensor
1 Map Sensor Harness

Extra's: * Everything you need to turn the key.
Engine Harness
P/S Pump
Alternator
Starter
O2 Sensor
engine mounts
RB26 Oil Pan or RB25 Oil Pan
ACT 6 Puck Clutch, rated to 550hp and 480ft/tq has 3264kms on it.
Second Exhaust manifold (made to fit RB26 in S13)
Second Wastegate to fit the other manifold

Tuning:

This setup made 467whp @ 13 psi with a slightly smaller turbo. Should make 500whp easily, and reliable doing it!


I can also include a set of used Toda Camshafts & Cam Gears for $700 installed. 4" greddy fmic piping, Transmission, Sard or Aeromotive FPR's etc... tons of stuff for a small cost.

http://i124.photobucket.com/albums/p33/Skylinegtr20/My%2091%20GTR/CopyofIMGP3476.jpg
http://i124.photobucket.com/albums/p33/Skylinegtr20/My%2091%20GTR/CopyofIMGP3479.jpg

Price:

I am losing money on this deal, I purchased it for $7000 shipped however I added a brand new Greddy intake manifold, Tomei manifold gaskets, rb26 oil pan, engine mounts, downpipe, 2nd manifold/wastegate and small things here and there! So I adjusted the price to cover some of my costs!

I am asking $8000.00 semi-firm + shipping

Trades:

Willing to trade for a lightly modified S13 w/SR20 or highly modified S13 + cash.
-----------------------------------------------

* No low ball offers will be accepted or replied too

Thanks,