Command Start CS310 Starter Disable

[the_guy_man]

Hello all: my van had the "starter disable" feature when the CS was installed. I now have a goverment issued immobilizer installed. I no longer need the CS "starter disable", and want to disable it, just to remove another possible point of failure in the future.

How do I dsiable the starter disable? Programming, or did this also include a relay that I should remove/bypass?

[Strugari]

The relay would be installed in the starter wire of the car. If you remove the relay you will have to connect the starter wire back together.
You can just cut the wire for the activation of the starter disable, which would be the violet wire on the small harness.
Make sure that the relay was installed as the violet wire is usually used to activate the bypass module.