PDA

View Full Version : radiostar generation 2 way security system



slouch
11-07-2009, 06:58 PM
need some help.. i bought a radiostar generation 2 way alarm and remote starter module RSA0591 in the installation its asking to connect the blue and white wire -200 (ma) bypass to the starter interface module.. not sure wha is asking .. can anyone help me out with that

silvercivicsir
11-07-2009, 10:40 PM
what kind of car is it?

Ashers
11-07-2009, 11:04 PM
That wire (I believe) is for a immobilizer bypass. It tells the bypass that you're trying to remote start the car.

slouch
11-10-2009, 07:51 PM
my car is a 1998 Nissan Pathfinder.. don't have chip in my keys.. just a regular key.. i tried connecting the system but wont start on the starter module there is 2 pink wires for ignition 1 and 2 not too sure how to connect.. what am i leaving out ..any help

slouch
11-10-2009, 07:55 PM
not using an immobilizer.. so sould i not connect this wire

silvercivicsir
11-10-2009, 11:32 PM
nope, don't connect the wire.. Nissans have two starter wires, and you need to hook them both up.

slouch
11-11-2009, 11:45 AM
ok i found both starter wire but the remote starter only gives 1 starter wire and 2 ingnition wire .. my car has both starer wire and i ignition wire..

silvercivicsir
11-11-2009, 07:05 PM
use a relay, and hopefully the radiostar has a neg start to trigger the relay

sahra
01-17-2014, 09:02 PM
hi
i have installed the Radiostar remote car starter model RSA0591 on a 2008 nissan quest having problem can anybody help me?have some questions :confused: