Ekliptix
08-28-2002, 07:58 PM
13.53 @ 106 on 10 psi w/2.0 60' . First time with a new setup and 22" slicks.
http://members.aol.com/rawdeelux/ffdragger8.jpg
http://members.aol.com/rawdeelux/ffdragger9.jpg
http://members.aol.com/rawdeelux/ffdragger10.jpg
http://members.aol.com/rawdeelux/ffdragger11.jpg
Setup:
B18A1
Stock head, sleeves and bore
T3/T04E .63 A/R stage III trim turbine, 57 trim compressor
Rev Hard manifold
Spearco intercooler
Eagle rods
JE 9.0:1 pistons
Walbro 255 ltr/hr in-tank fuel pump
SARD fuel pressure regulator
AEM fuel rail
RC 550cc injectors
Hondata 3b ECU
A'PEX AVC-R boost controller
Fluidyne radiator
Thermal R&D 3" exhaust
"I haven't been on a dyno yet but the car was tuned on the street with a wideband 02 for 10 psi. I'm hoping for 325-350 whp and low 12s with 16 psi."
http://members.aol.com/rawdeelux/ffdragger8.jpg
http://members.aol.com/rawdeelux/ffdragger9.jpg
http://members.aol.com/rawdeelux/ffdragger10.jpg
http://members.aol.com/rawdeelux/ffdragger11.jpg
Setup:
B18A1
Stock head, sleeves and bore
T3/T04E .63 A/R stage III trim turbine, 57 trim compressor
Rev Hard manifold
Spearco intercooler
Eagle rods
JE 9.0:1 pistons
Walbro 255 ltr/hr in-tank fuel pump
SARD fuel pressure regulator
AEM fuel rail
RC 550cc injectors
Hondata 3b ECU
A'PEX AVC-R boost controller
Fluidyne radiator
Thermal R&D 3" exhaust
"I haven't been on a dyno yet but the car was tuned on the street with a wideband 02 for 10 psi. I'm hoping for 325-350 whp and low 12s with 16 psi."