S2Kok
02-19-2010, 11:54 AM
Selling my: 2004 Honda S2000 with 55,600kms.
Price: $32,500
Currently at 8.5psi but will come tuned all to 14psi (420 - 440 whp) with all be back up support you need from Mase himself.
Includes all factory parts as well.
Car is in Immaculate condition, never winter driven, always pampered, stored inside heated underground parkade, and never smoked in. Front bumper has quite a few little rock chips from the roads here and there is a scrape on the driver side rear bumper behind the wheel about 8" long.
Car has only approx. 2000kms with new Turbo kit / clutch. Everything works, runs, and looks to perfection as the owner of Mase Engineering, who designed the kit, did the install himself with another Honda tech.
Turbo Kit:
Mase Engineering Turbo Kit: http://www.s2ki.com/forums/index.php?showtopic=713429&st=0
Precision 5857 turbo
Mase Engineering Turbo Manifold/Downpipe/Wastegate Dump
Manifold Made from Schedule 10 thick walled Stainless Steel
Downpipe made From 16 Gauge 304 Stainless Steel
Designed with V-band clamps
Mase Engineering Specified Precision High Flow Intercooler
Bar & plate construction � Garrett Core
Extremely Dense to ensure maximal cooling
Mase Engineering Specified Precision Turbo
Specifically chosen for a well balance of power and transient response
(Turbo Options available)
Tial Wastegate and Blow off Valve
Mase Engineering Intercooler Piping
Aluminum construction saving weight and proper heat dissipation
Mandrel Bent for optimal flow
Bead rolled and T-Bolt Clamps Included
Engine Management and Fuel Setup
AEM EMS 1052U Pre-Tuned tuned by Mase
725cc Injectors with plug and play clips (no resistor box or extra wiring needed)
255 lph High Pressure Fuel pump
SOS 4 bar Plug and Play Map sensor
Mac Boost Controller integrated
ACT heavy duty pressure plate and street disc clutch kit
18x8 +45 / 18x9 +43 Work XD9's in work metal buff finish
T1R 70R-EM exhaust
Tein S-tech lowering springs
Authentic Mugen AP2 front splitter
GT Motoring rear spoiler
Clear side markers
I can provide almost all receipts for all items except for the wheels / tires. All other parts I have receipts for and will be included in the sale. Total value of bolt on items to the car is 16k + with 11k of that in the Turbo / Clutch / Install. (Again, all receipts available)
Im sure there are a few local members here from Calgary that will agree the car is super clean. It is an original US car from Tacoma. Orignal owner was 60+ dentist who put 14k kms on it and the next owner was from Victoria, 52 year old family friend, who drove it to 48,000kms. I have owned it for coming up on 2 years. All import documents are also included.
Reason for selling: " I want an IS-F" :D
Will require specific interested buyer.
please call - 403-616-7329 for SERIOUS inquiries only.
http://i29.photobucket.com/albums/c267/Jacked101/Picture210.jpg
http://i29.photobucket.com/albums/c267/Jacked101/Picture212.jpg
http://i29.photobucket.com/albums/c267/Jacked101/013-5-1.jpg
http://i29.photobucket.com/albums/c267/Jacked101/014-5-1.jpg
http://i29.photobucket.com/albums/c267/Jacked101/019-4-1.jpg
http://i29.photobucket.com/albums/c267/Jacked101/022-4-1.jpg
http://i29.photobucket.com/albums/c267/Jacked101/004-4.jpg
http://i29.photobucket.com/albums/c267/Jacked101/051.jpg
http://i29.photobucket.com/albums/c267/Jacked101/059.jpg
Price: $32,500
Currently at 8.5psi but will come tuned all to 14psi (420 - 440 whp) with all be back up support you need from Mase himself.
Includes all factory parts as well.
Car is in Immaculate condition, never winter driven, always pampered, stored inside heated underground parkade, and never smoked in. Front bumper has quite a few little rock chips from the roads here and there is a scrape on the driver side rear bumper behind the wheel about 8" long.
Car has only approx. 2000kms with new Turbo kit / clutch. Everything works, runs, and looks to perfection as the owner of Mase Engineering, who designed the kit, did the install himself with another Honda tech.
Turbo Kit:
Mase Engineering Turbo Kit: http://www.s2ki.com/forums/index.php?showtopic=713429&st=0
Precision 5857 turbo
Mase Engineering Turbo Manifold/Downpipe/Wastegate Dump
Manifold Made from Schedule 10 thick walled Stainless Steel
Downpipe made From 16 Gauge 304 Stainless Steel
Designed with V-band clamps
Mase Engineering Specified Precision High Flow Intercooler
Bar & plate construction � Garrett Core
Extremely Dense to ensure maximal cooling
Mase Engineering Specified Precision Turbo
Specifically chosen for a well balance of power and transient response
(Turbo Options available)
Tial Wastegate and Blow off Valve
Mase Engineering Intercooler Piping
Aluminum construction saving weight and proper heat dissipation
Mandrel Bent for optimal flow
Bead rolled and T-Bolt Clamps Included
Engine Management and Fuel Setup
AEM EMS 1052U Pre-Tuned tuned by Mase
725cc Injectors with plug and play clips (no resistor box or extra wiring needed)
255 lph High Pressure Fuel pump
SOS 4 bar Plug and Play Map sensor
Mac Boost Controller integrated
ACT heavy duty pressure plate and street disc clutch kit
18x8 +45 / 18x9 +43 Work XD9's in work metal buff finish
T1R 70R-EM exhaust
Tein S-tech lowering springs
Authentic Mugen AP2 front splitter
GT Motoring rear spoiler
Clear side markers
I can provide almost all receipts for all items except for the wheels / tires. All other parts I have receipts for and will be included in the sale. Total value of bolt on items to the car is 16k + with 11k of that in the Turbo / Clutch / Install. (Again, all receipts available)
Im sure there are a few local members here from Calgary that will agree the car is super clean. It is an original US car from Tacoma. Orignal owner was 60+ dentist who put 14k kms on it and the next owner was from Victoria, 52 year old family friend, who drove it to 48,000kms. I have owned it for coming up on 2 years. All import documents are also included.
Reason for selling: " I want an IS-F" :D
Will require specific interested buyer.
please call - 403-616-7329 for SERIOUS inquiries only.
http://i29.photobucket.com/albums/c267/Jacked101/Picture210.jpg
http://i29.photobucket.com/albums/c267/Jacked101/Picture212.jpg
http://i29.photobucket.com/albums/c267/Jacked101/013-5-1.jpg
http://i29.photobucket.com/albums/c267/Jacked101/014-5-1.jpg
http://i29.photobucket.com/albums/c267/Jacked101/019-4-1.jpg
http://i29.photobucket.com/albums/c267/Jacked101/022-4-1.jpg
http://i29.photobucket.com/albums/c267/Jacked101/004-4.jpg
http://i29.photobucket.com/albums/c267/Jacked101/051.jpg
http://i29.photobucket.com/albums/c267/Jacked101/059.jpg