gregrego
03-09-2010, 02:26 AM
I have a stripped bottom end in GREAT shape, engine had 40000kms on it, jdm rev 2 turbo engine.
I regret tearing it down it's so minty. The piston caps were VERY clean, and shiny. I can have the block professionally re-assembled using your choice of bearings, studs, pistons, oem rods are good, and crank is good.
I have EVERYTHING that would be on the engine except Turbo, and Exhaust manifold.
The things that might spark interest are,
-alternator
-coolant sensors
-oem knock sensor
-good oil and water pump
-cam pulleys
-Block
-crank (GREAT SHAPE)
-rods
-head is good, needs to be decked, and one cam bearing is grooved.
-I can dis-assemble head if anyone wants parts from it
-rev2 intake manifold
-gutted TVIS plate
-coolant pipes
-coolant elbows (good if you want to weld it up!)
-rev 2 fuel rail and injectors
-valve cover, I think it was powdercoated navy blue, may just be a really good rattle can job.
Anything else you can think of let me know, shoot me offers on all parts.
I regret tearing it down it's so minty. The piston caps were VERY clean, and shiny. I can have the block professionally re-assembled using your choice of bearings, studs, pistons, oem rods are good, and crank is good.
I have EVERYTHING that would be on the engine except Turbo, and Exhaust manifold.
The things that might spark interest are,
-alternator
-coolant sensors
-oem knock sensor
-good oil and water pump
-cam pulleys
-Block
-crank (GREAT SHAPE)
-rods
-head is good, needs to be decked, and one cam bearing is grooved.
-I can dis-assemble head if anyone wants parts from it
-rev2 intake manifold
-gutted TVIS plate
-coolant pipes
-coolant elbows (good if you want to weld it up!)
-rev 2 fuel rail and injectors
-valve cover, I think it was powdercoated navy blue, may just be a really good rattle can job.
Anything else you can think of let me know, shoot me offers on all parts.