View Full Version : Where to find: Electronic LED Flasher Relay
I'm putting LED signals on my motorcycle and i'll need a LED flasher. Anyone know where I can find one in town?
Doozer
03-16-2010, 08:44 PM
Are you sure you don't just need to add some resistors? I did a full LED conversion in my car, including signals, and didn't touch the flasher. :dunno:
Maybe a bike's different, but I could point you in the direction of resistors if that would work.
Thaco
03-16-2010, 09:05 PM
you can do either, most do the load resistors due to cheap cost, availability, and universal fitment.
Well i measured the resistance of the bulbs I took off and it was like 1.2ohm.
So if I match this will that be sufficient?
Thaco
03-16-2010, 10:05 PM
basically what you need is this
but you need them for both sides, so you need 2 of em, which you may not have the space for, so the flasher is probably the better way to go in your case.
http://www.eautoworks.com/images/350/pic33226.jpg
I have resistors already. I tried 25ohm 25watt which technically by the math shoulda worked.
scat19
03-17-2010, 09:44 AM
Don't want to sound retarded but you put it in parallel right, not series?
old&slow
03-17-2010, 09:45 AM
http://www.canadiancruisercustomizing.com/
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.