PDA

View Full Version : Bmw Rims ???


RX-7_TWINTURBO
08-30-2002, 06:26 PM
I seem to see alot of nice rims on bmw's lately and they seem to all be from the same company
im not sure what the name of the company is but from what i can see it has 1000 written on the centre cap as well as some letters and the rims are usally gun metal or greyish in color
any of you high rollers know who makes these rims ??:dunno:
Rydog
08-30-2002, 08:54 PM
sounds like mille miglia (spelling?) to me.
nismodrifter
08-30-2002, 09:29 PM
yeah, those are mille miglkdklajsdfoiaj (who carez about spelling)
RX-7_TWINTURBO
08-30-2002, 09:35 PM
hmm cool
i'll see if i can find a pic of the rim i like
RX-7_TWINTURBO
08-30-2002, 09:41 PM
theese are the ones i was looking for
a guy on my street has them on a 328i and they look sooo goddamn nice
http://members.albertacars.net/rx7twinturbo/mm11special.jpg
thanks boys :thumbsup:
Rydog
08-31-2002, 01:03 AM
yep, those are mille's alright. Tunerworks sells them. should be able to get you some i'd think....Rob?
RX-7_TWINTURBO
08-31-2002, 01:22 AM
but will they only fit bimmers ?
OMOYYC
08-31-2002, 01:48 AM
Those wheels aren't even that expensive too :thumbsup:
infamous
08-31-2002, 02:14 AM
yeah they are spelled mille miglia....if you want to see what they look like on a bmw or any other car for that matter, tirerack.com is a good site to go to.
pinoyhero
08-31-2002, 10:54 AM
how much would those cost for 18s with rubber after m&B?
OMOYYC
08-31-2002, 03:33 PM
You should ask Rob @ Tunerworks! :thumbsup:
MrX
08-31-2002, 04:36 PM
Originally posted by RX-7_TWINTURBO
but will they only fit bimmers ?

There's lots of fitments available from Mille Miglia. What bolt pattern and offset does your car use??

Here's my set.

http://merkur.beyond.ca/car1.jpg
RX-7_TWINTURBO
08-31-2002, 05:16 PM
http://members.albertacars.net/rx7twinturbo/mm11specialbmw.jpg:drool: :drool: :drool:

The bolt pattern on a Turbo II is 5 X 114.3
But this wheel has been made exclusively for BMW applications and has a large opening in the centre to take the original BMW cap

i think im outta luck because the bimmers use a 5 X 120 offset
buh_buh
08-31-2002, 05:26 PM
they kinda look like the ones on Rage's porche
MrX
09-01-2002, 02:20 PM
The bolt pattern on a Turbo II is 5 X 114.3
But this wheel has been made exclusively for BMW applications and has a large opening in the centre to take the original BMW cap

i think im outta luck because the bimmers use a 5 X 120 offset [/B]

Isn't 5X114.3 the same as late gen preludes?? I've seen that boltpattern before, so i don't think it will be too hard to find something through Mille Miglia. It's just a matter of offset.
RX-7_TWINTURBO
09-01-2002, 03:14 PM
This is my only option for this type of rim... the spokes are twice as wide and it does'nt come in "Brilliant Anthracite"
http://members.albertacars.net/rx7twinturbo/mm_11_2_ci3_l.jpg
These are the ones i want that dont fit they only come in 5X120
http://members.albertacars.net/rx7twinturbo/mm11special.jpg
hmm guess i'll keep looking