FS: Chevy 350, 355 Forged Pistons, Probe FPS, Brand New WITH RINGS.

[the_zander]

As per forum regulations all items for sale have accompanying factory packaging and reciepts.
---------------------------------------------------------------------------
Brand new never installed. Purchased for $600 from mopac. Going for bigger displacment (383) and as such i need different pistons.

These are Probe FPS series premium forged pistons. 0.030" over-bore with a -20.3cc dish. these are press-fit pistons and would make an excellent upgrade for a factory motor for someone looking to run a modest amount of nitrous.

I'll throw in a set of mahle plasma-moly rings.

Asking $300 firm.

Feel free to contact me w/ any questions at 403-708-6470 or [email protected]

Regards,
Alexander
---------------------------------------------------------------------------

http://www.probeindustries.com/v/vspfiles/photos/P2441F-3.jpg

[the_zander]

I have a fully balanced (+/- 0.5g) rotating assembly comprised of a SCAT nodular crank (Rated by the manufacturer to 500hp), SCAT procomp 4340 forged rods (the beefiest i-beams i could find, they have 7/16 rod bolts and are rated to 600hp) and kieth black forged pistons -18cc inverted dome (premium 2618 alloy).

I will also include a 4-bolt main, roller block core and a set of low-milage iron l98 heads (complete). After some machining (bore/hone/assemble) this will make a wicked street motor, pair it with a 220/230 duration cam and you'll be close to 400hp on pump gas.

Asking $1000 firm.

If you have any questions whatsoever please feel free to call me at 403-708-6470. Please leave a message if i am not able to answer.

-Alexander

http://www.cnc-motorsports.com/_images/scat/Chrysler%20Forged%20SB%20Std%20We_l.jpg

[the_zander]

bump