AndyL
06-03-2010, 10:25 AM
Caught this one in fourwheeler... This is cool, Even better when the CEO answers emails within minutes when asked about availability / pricing (website hasn't been updated)
http://paretopoint.com/item---Pareto-Point-Industry-Launches-TopDogV--press_topdogv_bypass.html
http://paretopoint.com/media/images/product_detail/topdogv.jpg
Thank you for your interest in TopDog V, the Parallel-Flow Oil Bypass
Filtration System. As I mentioned to several of you, the pre-launch came
early and exceeded our expectations. We are moving as fast as we can to
replenish our stock. This should be accomplished within two weeks. Thanks
also for your patience. Meanwhile, I have attached a short paper that
explains the product as well as a press release for your review. We want
to make sure that you are wholly satisfied with TopDog V. Please feel free
to call me with any questions you may have.
Pricing is based on the diameter of your current full-flow filter, the
nipple bore (4.5" only), and whether you want to purchase a) the system
adapter alone for those who want to build their systems (solo price), or b)
the entire system, which includes the system adapter, rubber hoses and
fittings, a remote mount, and an Amsoil bypass filter rated at 2 microns,
absolute (kit price). PPI retail pricing is:
4.5" diameter full-flow: Solo - from $102 - $126 Kit
$222 - 246 (depending on bore size)
3.5" diameter full-flow: Solo - $84 Kit
- $192
3.0" diameter full-flow: Solo - $78 Kit
- $190
While this will not affect most of you, please be advised that:
. Some GM big/small block engines require an extension plate. This
will add about $20 to the cost. We will have instructions for this on the
website soon, or call us.
. This TopDog V model does not work with canister filters. That model
is under development
. If you are building your own system, the adapter/system will not
work well with high resistance bypass filters due to our directing the clean
oil into the engine galleries, rather than the sump. We recommend that you
use the AMSOIL Bypass filter we recommend or an equivalent.
We look forward to hearing from you. I am hoping to have the shopping cart
up in about ten days. If you need to know the proper size to order,
including nipple thread/pitch, please send us the following: vehicle
year/make/model and engine size OR filter make and model.
Thank you again for considering TopDog V,
Bob H
Robert J Hammer, Ph.D.
Chief Executive Officer
Pareto Point Industries
7250 Bandini Blvd, #114
Commerce, CA 90040-3344
323 726-2199 (office)
310 993-1069 (cell)
323 726-2184 (fax)
[email protected]
www.paretopoint.com
Amsoil filter, but without the cost of the amsoil kit - nice :)
http://paretopoint.com/item---Pareto-Point-Industry-Launches-TopDogV--press_topdogv_bypass.html
http://paretopoint.com/media/images/product_detail/topdogv.jpg
Thank you for your interest in TopDog V, the Parallel-Flow Oil Bypass
Filtration System. As I mentioned to several of you, the pre-launch came
early and exceeded our expectations. We are moving as fast as we can to
replenish our stock. This should be accomplished within two weeks. Thanks
also for your patience. Meanwhile, I have attached a short paper that
explains the product as well as a press release for your review. We want
to make sure that you are wholly satisfied with TopDog V. Please feel free
to call me with any questions you may have.
Pricing is based on the diameter of your current full-flow filter, the
nipple bore (4.5" only), and whether you want to purchase a) the system
adapter alone for those who want to build their systems (solo price), or b)
the entire system, which includes the system adapter, rubber hoses and
fittings, a remote mount, and an Amsoil bypass filter rated at 2 microns,
absolute (kit price). PPI retail pricing is:
4.5" diameter full-flow: Solo - from $102 - $126 Kit
$222 - 246 (depending on bore size)
3.5" diameter full-flow: Solo - $84 Kit
- $192
3.0" diameter full-flow: Solo - $78 Kit
- $190
While this will not affect most of you, please be advised that:
. Some GM big/small block engines require an extension plate. This
will add about $20 to the cost. We will have instructions for this on the
website soon, or call us.
. This TopDog V model does not work with canister filters. That model
is under development
. If you are building your own system, the adapter/system will not
work well with high resistance bypass filters due to our directing the clean
oil into the engine galleries, rather than the sump. We recommend that you
use the AMSOIL Bypass filter we recommend or an equivalent.
We look forward to hearing from you. I am hoping to have the shopping cart
up in about ten days. If you need to know the proper size to order,
including nipple thread/pitch, please send us the following: vehicle
year/make/model and engine size OR filter make and model.
Thank you again for considering TopDog V,
Bob H
Robert J Hammer, Ph.D.
Chief Executive Officer
Pareto Point Industries
7250 Bandini Blvd, #114
Commerce, CA 90040-3344
323 726-2199 (office)
310 993-1069 (cell)
323 726-2184 (fax)
[email protected]
www.paretopoint.com
Amsoil filter, but without the cost of the amsoil kit - nice :)