WTB: Brakes for 1991 180sx

[180drft]

Im looking for stock
-Calipers
-Pads
-Rotors

or if anyone has any other suggestions? Can 240sx calipers bolt on a 180sx?

(My stock calipers now are wearing un-evenly on the pads for some reason so I do need the whole assembley unless someone knows how to fix stock calipers from un-even pad wear?)

Let me know what you got, Thanks.

[sr20s14zenki]

240sx calipers will bolt on, but they are smaller than what you have. I do believe that for rotors, you use altima rotors, and for pads, you use pads from a maxima. Im not 100% on if maxima calipers will bolt on.

[180drft]

Thanks again dude. Umm what year of altima for the rotors? and what year of maxima for the pads?

I just traced out the pads last night and measured the rotor. Soooo if I can i'll order them from PDM-Racing. Could be cheap, I don't know yet though.

[sr20s14zenki]

i believe its 94 altima, and 90-99 maxima.

[gretz]

rear pads are 240sx...

[Abeo]

I have some q45 calipers/rotors, just taking up space. You would need pads, and to redrill the rotors if you are still 4 bolt. Brakes are in-between the 300zx sizes (12 inch rotor, 28mm thick), but since they are sliding single piston calipers they take up no more room than the stock 240 or 180 brakes (and will fit under teardrops).

They are taking up space in my garage, so you can have them if you want them

[180drft]

oh ok, Yea im still 4-bolt... Would I be able to buy 4 bolt rotors for your q45 calipers? My stock rotors now are 11'' and 22.1mm thick so im guessing that should be ok.

[Abeo]

I don't know if anyone stocks them in town, you may be able to order them from the states pre drilled. If you or someone you know is handy you can drill them yourself with a hand drill and an old 4 bolt rotor as a guide. Forgot to mention that you use the stock brake lines.

[180drft]

ahh ok

Bump. More or less looking for 180sx pads

[180drft]

BUMP

Still looking to buy stock front calipers for 180sx or 300zx calipers with rotors and pads