FS: Jdm Motors!!

[jdmsource]

Hey everyone my name is Shoaib and i am new sponser of Beyond. My company is Japan Domestic Motor (www.jdmsource.ca). i would like to let everyone know that we are a new JDM shop in calgary. we carry all jdm motors and accessories at the lowest prices guaranteed. We carry over 500 motors in stock! i would also like to add that we do warranty all of our motors purchased. Thanx!

Contact:
Japan Domestic Motor
#13 1231 36 Ave NE
Calgary,Ab T2E6N6

tel: 403 717 4252
toll free 1 866 717 4252

[Speed_Dreams]

Linky no worky

[jdmsource]

Originally posted by Speed_Dreams
Linky no worky sorry about that ummm maybe try typing in www.jdmsource.ca!

[ramminghard]

can you get a cheap S53 toyota tranny for a 90-93 celica. Preferably low km but must have good synchros ad not grind at all.

[jdmsource]

Originally posted by ramminghard
can you get a cheap S53 toyota tranny for a 90-93 celica. Preferably low km but must have good synchros ad not grind at all. yes i can gimme a call monday and we cantalk abouut it then! i gotta check to see if i have it in stock!! thanx

[CRXguy]

How about a JDM (EF8) front end conversion for a '91 CRX?

[jdmsource]

Originally posted by CRXguy
How about a JDM (EF8) front end conversion for a '91 CRX?
i do have a front conversion for that crx includes hood, lights, and fenders. But i dont have the front bumper i sold it last week.

[FallenAngel]

why are the prices on the website in US dollars? just curious, since you are based in calgary...

any idea if you could get a Mazda 2.0L FE-DOHC (FE3)? i think i asked you once, but i couldn't find the thread afterwards.

[ FallenAngel ]

[ramminghard]

Originally posted by jdmsource
yes i can gimme a call monday and we cantalk abouut it then! i gotta check to see if i have it in stock!! thanx

PM me with a ballpark price on one please.

[Moonracer]

jdmsource

Do you install the engines and tranies as well?

[jdmsource]

Originally posted by Moonracer
jdmsource

Do you install the engines and tranies as well?
yes we do install motors and trannies!

[Moonracer]

Originally posted by jdmsource

yes we do install motors and trannies!

Thanks, that's good to know. :thumbsup:

[calgarys13]

what about an s13 front clip?

[CRXguy]

Originally posted by jdmsource

i do have a front conversion for that crx includes hood, lights, and fenders. But i dont have the front bumper i sold it last week.

PM me a price for a COMPLETE conversion then when you have a chance.

Hood
Headlights
Corner lights
Bumper
Rad support

[jdmsource]

Originally posted by calgarys13
what about an s13 front clip?
hey man yes i gotta an s13 nose clip which includes lights,hood,bumper,fenders,and rad support for $1400. it is in very good condition, and as for the motor i have s13's for $2100 with uncut wire harness( out of stock) nad with cut harness for $1650!

[bmeier]

JDMsource is a good guy, just bought a levin 4agze for a great deal from him. He is even going to deliver!!

[jdmsource]

Originally posted by bmeier
JDMsource is a good guy, just bought a levin 4agze for a great deal from him. He is even going to deliver!!
thanx ben!

[donz]

yep great service, and great prices...

[CRX-R]

Can you get your hands on anything in the way of Power Windows/ Locks/ Gauge Clusters for a CRX? Thanks

[supaj87GTS]

Ive just gotta say the JDM Source is Awesome Alotof My Friend have done Business and they Are very Honest and Ligit!!!

JDM Teg lights
RS8 Rims/Tires
Turbo Timer...

I Am Logans Friend if you are wondering how I know all this...also Im looking for a B18C engine or Other B series Engine please PM me.

Also Here is a Free BUMP.

Peace

[PGTze]

Oh man! Where were you like 3 months ago when I was saving for a Mazda KLZE :( . I totally would have bought one off of you if it was in good shape. $500 US is DAMN CHEAP:eek:!!!!!

[jebsleo]

Originally posted by bmeier
JDMsource is a good guy, just bought a levin 4agze for a great deal from him. He is even going to deliver!!

if he has the best prices, what you buy it for. I picked up my 4agze for 850 cnd shipped.

[jdmsource]

Originally posted by jebsleo


if he has the best prices, what you buy it for. I picked up my 4agze for 850 cnd shipped.

Ben got his for $800! complete motor and tranny with start up warranty and also hand delivered to him lol:D

[Jeff86]

I'm looking for an AE92 or AE101 JDM 4A-GZE with DLI, don't need the tranny, but I'd need the ECU, full wiring harness, as well as the coil packs, and all brackets and sensors.

Any idea what that would cost?


Thanks :)

[boi-alien]

i need a price on the JDM EF bumperlights

[SUPRAPHAT]

Can you get your hands on a front clip of a 1JZ?

Are the 1JZ's that you sell with an automatic or manual transmission?

Any chance of a boxing day sale or any type of sale on 1J's in the future?

Thanks

Jason

[jdmsource]

Originally posted by boi-alien
i need a price on the JDM EF bumperlights
ummm how does $40 for the pair sound? gimme a call 717 4252

[jdmsource]

Originally posted by SUPRAPHAT
Can you get your hands on a front clip of a 1JZ?

Are the 1JZ's that you sell with an automatic or manual transmission?

Any chance of a boxing day sale or any type of sale on 1J's in the future?

Thanks

Jason the 1jz's are manual and currently i am out of stock right now new goodies will be in in mid january

[teknical]

for the b18c5, is that the price for the full setup, ecu, tranny, etc.?
4000$ USD?

[Weapon_R]

This shop is JDM heaven :D Most unreal store i've been to in a while.

Hey Shohab I need some factory ITR sidemarkers - if you have any, post a price. I'll swing by on the weekend.

[jdmsource]

Originally posted by teknical
for the b18c5, is that the price for the full setup, ecu, tranny, etc.?
4000$ USD?
yes that is including the whole set up and it equals out to $5200 can.

[Jeff86]

Any idea on the 4A-GZE I posted up?

[jdmsource]

Originally posted by Jeff86
Any idea on the 4A-GZE I posted up?
hey sorry man i missed ur post! the last one "bmeier" bought from me yesterday and i should be getting more in the next shipment in mid january!

[Jeff86]

Originally posted by jdmsource

hey sorry man i missed ur post! the last one "bmeier" bought from me yesterday and i should be getting more in the next shipment in mid january!

Yeah I'm not looking to buy one right away, I am just curious about the price of one. Even approximate would be good! :D

[SUPRAPHAT]

Can you get your hands on front clips or just the motors for the 1J?

Thanks

Jason

[theken]

Originally posted by FallenAngel


any idea if you could get a Mazda 2.0L FE-DOHC (FE3)? i think i asked you once, but i couldn't find the thread afterwards.

[ FallenAngel ]

and your answer is??

[jdmsource]

Originally posted by Jeff86


Yeah I'm not looking to buy one right away, I am just curious about the price of one. Even approximate would be good! :D
yes check ur pm

[jdmsource]

Originally posted by theken


and your answer is??
sorry about that yes i will have one in mid january, had one but sold it last week

[Jeff86]

Originally posted by jdmsource

yes check ur pm

Checked and replied :)

[SUPRAPHAT]

Oh and do you install the 1jz's too? Cost?

Can you get a front clip? Cost?

Thanks

Jason

[Seanith]

any jdm b16 engines that cover the years 96-00? like a Sir integra? i need obd-2

[Rufus``]

pm me the price on jdm dc2-r front end conversion please.

including

rad support
headlamps (black non hid)
rebar
fenders
hood
front bumper cover with front lip

preferably in honda metal.

thanks

[Team_Mclaren]

do u have a ze with ms8 IM?? or can i order one thats specifily out of a ms8 (curved neck IM)? is it the same price? thx!

[vtec]

do you have ne type s motor parts from the prelude?

[jdmsource]

Originally posted by ~$eanith~
any jdm b16 engines that cover the years 96-00? like a Sir integra? i need obd-2
i only have the b16a2 that are obd1, all u need is a obd2 to obd1 jumper to make i t work with a odb2 car!!

[jdmsource]

Originally posted by Rufus``
pm me the price on jdm dc2-r front end conversion please.

including

rad support
headlamps (black non hid)
rebar
fenders
hood
front bumper cover with front lip

preferably in honda metal.

thanks
pm'd

[jdmsource]

Originally posted by vtec
do you have ne type s motor parts from the prelude? im sorry no parts only complete motor!

[civicsi]

Originally posted by jdmsource

i only have the b16a2 that are obd1, all u need is a obd2 to obd1 jumper to make i t work with a odb2 car!!


how much?>? for complete swap gimme details on what it all includes.thanks

[jdmsource]

Originally posted by civicsi



how much?>? for complete swap gimme details on what it all includes.thanks
check ur pm

[SUPRAPHAT]

Oh and do you install the 1jz's too? Cost?

Can you get a front clip? Cost?

Thanks

Jason

[Team_Mclaren]

Originally posted by Team_Mclaren
do u have a ze with ms8 IM?? or can i order one thats specifily out of a ms8 (curved neck IM)? is it the same price? thx!

u might've missed this ...

[jdmsource]

Originally posted by Team_Mclaren


u might've missed this ...
sorry man i missed ur post! i currently do not have the ze in stock but if u can check with me in mid jan i will be getting a shipment in so might have one for you then :)

[totaljdm]

:thumbsup: to Shoheb, GREAT SERVICE!!

[Incredib1e]

Wuts up man I'm looking for a 96-98 ls swap. B18b, you could give me a price on the complete swap. Thanks a lot.

Logan Childs

[legendboy]

I just don't understand why you people just don't pick up the phone and call him like you would any other business. Why would you want to waste time trying to corrispond on the internet when you can call and get all your info. :dunno:

[Seanith]

cause people are lazy, and are just window shopping ;)

Price on a jdm SiR2 b16a? ;)

[legendboy]

if i was shaob i wouldn't even respond. if someone has money to buy a swap i'll bet they will call.

[Incredib1e]

Why wouldn't he respond, I'm genuinely interested and if he responds and has a decent price then I would be more then happy to buy one from him. I don't call him on the phone cuz I don't have a canadian yellowpages I'm not from that country.

[Team_Mclaren]

Originally posted by Incredib1e
Why wouldn't he respond, I'm genuinely interested and if he responds and has a decent price then I would be more then happy to buy one from him. I don't call him on the phone cuz I don't have a canadian yellowpages I'm not from that country.


http://www.jdmsource.ca
or call toll free: 1- 866-717-4252

just call and im sure he'll be happy to help u out!

[legendboy]

Originally posted by Incredib1e
Why wouldn't he respond, I'm genuinely interested and if he responds and has a decent price then I would be more then happy to buy one from him. I don't call him on the phone cuz I don't have a canadian yellowpages I'm not from that country.


his toll free 1 800 number is in the first post of this thread

[C_CRX]

I like to do things over the net because I'm usually extremely busy at work during the day (8am-6pm reg working hours) so calling during the day is very limited. Weekends are also hectic since I'm on call 24/7/365 and sleep any extra time I get. That's just my situation tho.

[illeagle]

Umm.. I can't remember if it was you guys i called... but I'm looking for a B6-T motor from a 1988 Mazda 323 GT, GTX.. They also came in Mercury Capri's in the states..

B6T 1.6L DOHC Turbocharged I4
PM me.. i won't remember this thread..

[jdmsource]

ok guys sorry that i havent responded but i thot this thread was dead a long time ago! lol all my prices are on my site and i would be happy to give some quotes here as well but sometimes im so busy i dont have the time to check on here to see if there are any msgs. sorry guys and to tose that wanted the quotes u have been pm'd

BTW thanx cory and vince

[403nissan]

how much 4 a b16a complete swap?

[jdmsource]

pm'd

[slammed civic]

This is for the jdm guy , imm not gonna beat around the bush here , i got a 1997 honda civic dx coupe , i just blew the engine thank god !! , and i need some info on a bigger swap at a decent price , thanks my email is [email protected] ..... Only serious sellers please

[Seanith]

:rolleyes:

[celicaguy]

what about an all trac hood for a 90-93 celica?
price?

[cua0]

I'm curious, why when your website is jdmsource.ca (ca denoting canadian site) do you list prices in US dollars?

[Seanith]

I too would like to know :dunno:

[redexa]

any ca18det fwd ?

[BigDL]

Might be more usefull, to pm him instead of posting on this super old thread :P.

[asp integra]

how long would it take for you guys to do an integra engine swap?

[bruce_eli]

Guys, pm him for details. He is probably not even aware that this thread is alive again.

[Rianardo]

Not that I'm desperate to keep this thread alive but, yeah, call...the guy has answered EVERY time I've called after one or two rings.