Ek Coupe Fun

[TYPERAWR]

Hi, so i recently purchased this ek coupe completly stock and decided i would have some fun with it and this is what has happen in the last 2 months.

I didnt take much pictures but i will be sure to now.


So first thing i did was lower it and roll the fenders.

http://i33.tinypic.com/2vls7lh.jpg

Lowering it was a pain in the ass, all the bolts on the rear LCA
broke off and had to be drilled out. Took about 45 min a bolt, from there THANKS TO JOE G i needed new lower controll arms and he delivered some blox racing lca's just in time to finish lowering the car before the weekend.

Now i am using ground controls and the ride is really good, still waiting on koni yellows to come in the mail.

and obviously every car lowered with rolled fenders needs some wheels so i went with some sportmax 0 offset wheels. always wanted to rock some of these.

http://i33.tinypic.com/eb2dmc.jpg

thanks to my buddy he happen to be at PNP and found me some mint Acura el seats to replace the shitty stock ones and a armrest for 60 bucks lol!

seat on the left is cleaned seat on right is straight from PNP

http://i33.tinypic.com/25hn6gn.jpg

Along with the seats i did a cd player and speakers, no big deal got all of it on sale for $160 and it sounds awsome.

From there i did a full brake conversion just cause i dont like the way drums look and what would look better then some new brakes behind the new wheels. so i did eg6 sir with abs brakes. With that i bought all new wheel bearings ball joints rotors pads calipers stainless lines.
All through JDM SOURCE always some good parts at a awsome price.
Didnt really snap a shot while i was doing the swap since it was just as much of a pain in the ass as lowering it but we had it done in about 8 hours.

shitty iphone pic but thats what they look like.

http://i34.tinypic.com/2z3ndrs.jpg
http://i33.tinypic.com/2bcppk.jpg

Then a front and rear lip

http://i36.tinypic.com/f1msk1.jpg

Then some bad luck

flooded infront of my friends house and a ford f150 smuked my car.

http://i33.tinypic.com/28ba5xy.jpg

So i vacumed out all the water pulled the carpet out cleaned it all and put it back in, took about 4 days to dry and now you cant even tell it ever happen.

http://i33.tinypic.com/23gzc6a.jpg

so i bought a brand new 2000 civic front end thanks to initial_d
and a new Carbon spoon lip from Jackie and will at speedtech.

Thanks again everyone.

Of course i love to do everything myself so me and my buddy primed painted and installed everything.

http://i36.tinypic.com/30clmop.jpg

http://i34.tinypic.com/2d0fa6a.jpg

And yes its spray painted, i can spraypaint better then paint gun lol

Now im waiting for the paint to cure so i can wetsand and polish it.

http://i34.tinypic.com/2rhy7f9.jpg

http://i35.tinypic.com/f395ph.jpg

This is how it sits now.

Im currently looking for a front and rear ek camber kit so i can go lower, please pm me if you have one for sale.

And i am also looking for some.

-intercooler pipeing random bends or whatever
-blow off valve
-downpipe or exhaust pipeing


and possibly if i can get ahold of this stuff for cheap
-gt28rs
-AEM EMS
-Crower Turbo Cam


thanks for the read, always wanted one of these threads






UPDATE


Spark plugs were fucked up so i did a mini me swap so i can start building my turbo kit

http://i35.tinypic.com/hu16bs.jpg

http://i36.tinypic.com/2qns20l.jpg

http://i33.tinypic.com/14ui87l.jpg


Runs good, no check engine light or leaks.

Also picked up some parts.
GOT A SMOKIN DEAL on a Crower Stage 2 Turbo Cam!

[Sentry]

Love this car. :thumbsup:

[Tarrantula]

You can spray like that? holy shit man.. really good.

Could I contract you out to do a hockey mask for me? Case of beer? ha ha

[TYPERAWR]

lol iv never done a hockey mask but if you want i can try. You need single stage automotive paint. Its the most durable and easiest to spray. Any body shop supply store will mix it for you in any color you want. 16 bucks a can, and you want 1k build primer and thats about 9 bucks a can. i would say you need one of each, and after a week or two it needs a wetsand and polish to be really smooth and clear reflection.

[Tarrantula]

Originally posted by TYPERAWR
lol iv never done a hockey mask but if you want i can try. You need single stage automotive paint. Its the most durable and easiest to spray. Any body shop supply store will mix it for you in any color you want. 16 bucks a can, and you want 1k build primer and thats about 9 bucks a can. i would say you need one of each, and after a week or two it needs a wetsand and polish to be really smooth and clear reflection.

Sweet, Thanks for the info. Ill see what I can get as far as a colour (its currently painted, which i did myself, but it looks decent...)

Ill pm you in a day or two once i get the stuff.

Again, Nice work. all around.

[Mr_ET]

wrong front grille?

[Dodobird]

Originally posted by Mr_ET
wrong front grille?

It's a 96-98 grille if I'm not mistaken... Probably waiting on a CTR one or something.

[T-Dubbs]

too much mexi-poke
buy wheels that fit, or go pick some fruit

[streethondas]

99-00 front FTW and nice user name:bigpimp:

[TYPERAWR]

lol thanks streethondas.

So some updates.

Went to do a oilchange spark plugs and fuel filter.
And sure enough this car fucks with me.
The previous owner must have stripped one of the spark plugs
and while i was replacing it the spark plug broke into the head.

So I did a mini me swap over the weekend.

Updated my original post so all the pictures are there.

[streethondas]

That sucks! Did you do the headgasket and arp studs while you had it apart?

[TYPERAWR]

new headgasket old headstuds, i got another motor on the side, this engine is basicly to test everything on, gota fab all my charge pipes and whatnot cause the old intake manifold was garbage.

But so far so good, the pistons were mint, didnt burn any oil or anything and from what i can see everything seems to be perfect with the mini me swap so maybe it will last a few months on a gt28

[TYPERAWR]

Lots of new parts!!!

Finnaly got,

KYB AGX struts

AEM EMS

Crower stage 2 turbo cam

Equal length manifold

tial wastegate

turbosmart dual port blow off valve

little bit bigger turbo .42 .48 i think

Goes in on tuesday to my buddys at calgary autoworks to have the downpipe and charge pipes made. Aswell as my new 6puck clutch should be here.

Very excited will post pictures next week of the setup together

http://i54.tinypic.com/fy1gkj.jpg

http://i52.tinypic.com/9abk1c.jpg

[Sentry]

Hah so now you're doing something with it? Thought you were selling it. :poosie:

That little turbo will be enough for a stock bottom end.

It will spool stupid fast and be lots of fun.

[Shlade]

looks good man :thumbsup:

if u see me outside my garage pop by when its done so i can see it!

[slinkie]

props for all the DIY stuff enjoy

[riceboy]

Where did you get your manifold from?

[TYPERAWR]

Got it from a guy on kijiji who made it. It's actually pretty decent quality.

Update!
Charge pipes are done.
Car is boosting!
Post pics later.

[streethondas]

It's coming along really nicely!

How many psi you running and what are you running for tune?

[Myz]

You've got an awesome build going on.
Glad to see you'v stepped away from the norm's of JDM styling with your choice of wheels

[derek_k]

I bet his Halloween was a lot more scary than yours













http://i5.photobucket.com/albums/y155/kashminsky/6c3a1eb0.jpg

[derek_k]

Atleast it wasn't a kid lol

http://i5.photobucket.com/albums/y155/kashminsky/b04a2c6a.jpg

[88CRX]

Holy shit!

Lucky it didn't come through the windshield!

[derek_k]

Didn't touch the hood or the bumper somehow

[Shlade]

fuck not the fender again :rofl:

Sell that fucking curse of a car!

Give me the wheels for my stock eg :angel:

[R-Audi]

Yikes, scary Seb! Good to hear everyone was ok.

The damage certainly could have been worse!!!

[derek_k]

It's hard to see in the first picture


http://i5.photobucket.com/albums/y155/kashminsky/b137a719.jpg

[derek_k]

And in that picture the door is "closed"

[R-Audi]

Yikes. Way worse then how it looked in the first pictures....

[TYPERAWR]

Thanks guys lucky me I had oem glass to stop the deer from getting into my car.

Parting out the parts except for

wheels
suspension
turbo kit

offers?

[Nissan_Fanboy]

Originally posted by TYPERAWR
Thanks guys lucky me I had oem glass to stop the deer from getting into my car.

Parting out the parts except for

wheels
suspension
turbo kit

offers?
price on turbo kit?

[TYPERAWR]

If I am going to sell it. It will be complete
with injectors aem ems pipes bov everything for $2200
basicly what I am into everything for. I used it all for less then a tank of gas

[Nissan_Fanboy]

Originally posted by TYPERAWR
If I am going to sell it. It will be complete
with injectors aem ems pipes bov everything for $2200
basicly what I am into everything for. I used it all for less then a tank of gas

damn dude!
=(

why not find another coupe?\
there cheap!

[TYPERAWR]

That's the plan. That's why I'm not parting the stuff I wanna keep.
Turbo kit wheels suspension
only if someone wants to buy everything and for what I payed then they can take it.

[Nissan_Fanboy]

Originally posted by TYPERAWR
That's the plan. That's why I'm not parting the stuff I wanna keep.
Turbo kit wheels suspension
only if someone wants to buy everything and for what I payed then they can take it.

No more boosted coupe?
=(
or mexi poke though!!!

[cjay^]

Originally posted by Myz
You've got an awesome build going on.
Glad to see you'v stepped away from the norm's of JDM styling with your choice of wheels

I wouldn't call Sportmaxx wheels being "away from the norm" lol

ANyways glad nobody got hurt, too bad about the car though...

[TYPERAWR]

We will see.
Right now I'm buying a winter beater save my money and wait it out.
If I find a coupe I want i will poke it out and boost it but not till next year.
I will post pics of the turbo kit n stuff later on here for a late update.

[TYPERAWR]

Alright Gota finish this build thread somehow,


So i finally had everything to boost...
so i put it all on


http://i53.tinypic.com/2hzs3h4.jpg


then i had my charge pipes made out of stainless steal.
Thanks Devon!

http://i54.tinypic.com/29g1h13.jpg

http://i51.tinypic.com/314w9oj.jpg

http://i53.tinypic.com/6ppx55.jpg

Then this happened before i could tune it and put a new clutch in it. :(

http://i54.tinypic.com/2rhodiu.jpg

Now its being parted out

engine c/s
front end c/s

[Ukyo8]

Saw you driving on 22x a few weeks ago, stance looks sick!