PDA

View Full Version : Nissan_Fanboy's 94 EJ-UNO Build Thread



Nissan_Fanboy
08-20-2010, 08:16 PM
This is my 1994 Civic Si Coupe.

I know its not the most amazing civic around, nor is it the fastest, cleanest, but its my civic and i love it.
I have owned this civic since April 2009, i bought it for myself as a present for my birthday. Picked it up april 12th, a day after my birthday.

Clean Car, was from BC since 2006.
Came with

-Alarm
-Neuspeed Springs
-Alpine Type S Speakers
-Alpine Deck
-Del Sol Rims

Looked like this.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs112.snc1/5118_215927130205_898815205_7453080_1706109_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs112.snc1/5118_215927145205_898815205_7453083_7435148_n.jpg

My buddy gave me his old short ram intake of his civic.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs092.snc1/5118_215927205205_898815205_7453093_6984723_n.jpg

I decided to clean it up more than the previous owner did. Kept really clean.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs114.snc1/4838_216508710205_898815205_7471970_1614440_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs114.snc1/4838_216509705205_898815205_7471982_4029144_n.jpg

I thought that the car would look good on bronze rims.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs171.snc1/6414_242735615205_898815205_8155528_6139151_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs191.snc1/6414_242735630205_898815205_8155530_6153489_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs191.snc1/6414_242735765205_898815205_8155553_6541294_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs191.snc1/6414_243157020205_898815205_8166654_2356755_n.jpg

I decided that the car was just to quiet. Found a 92-00 Megan Racing Drift Spec Exhaust. Sounds great.

6-haQ_XGVfI

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs171.snc1/6414_251086845205_898815205_8339820_5517680_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs171.snc1/6414_251086860205_898815205_8339823_5378217_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc1/hs208.snc1/7522_275332945205_898815205_8854076_7945220_n.jpg

Nissan_Fanboy
08-20-2010, 08:19 PM
So the car sat this way for about 8 months or so because i was burdended with unwanted debt.

Well its all over now, and i can finally sink my teeth into the game.

I picked up a set of Skunk2 Pro-S Coilovers and Camber Kit for a great price.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs108.snc4/35739_10150216075750206_898815205_13319095_6573217_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs088.snc4/35739_10150216075765206_898815205_13319097_852844_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs090.snc4/35841_10150217953775206_898815205_13376770_3809004_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs076.snc4/35163_10150218075475206_898815205_13381214_13380_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs001.snc4/33402_10150223037860206_898815205_13522459_3550444_n.jpg

Nissan_Fanboy
08-20-2010, 08:23 PM
I paid a visit to tirebob and he got me start on rims and tires.
I eventually picked up a set of 15x8 +25 Axis OG's wrapped in 195.15R15 Khumo STP's.

The car feels great, handles amazingly.
Thanks again bob.

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs208.snc4/38731_10150234865740206_898815205_13865189_1075693_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs167.snc4/37691_10150234865870206_898815205_13865197_1960271_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs215.snc4/39105_10150234865905206_898815205_13865200_3332305_n.jpg

I got it aligned and everything, all the musts.
I decided to see how it would look damn low.
I like ;)

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs194.ash2/45735_10150249004780206_898815205_14275712_267843_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs378.snc4/46095_10150249004850206_898815205_14275715_7379470_n.jpg

But now i need to roll my fenders big time, just to lazy!
UGHH!

But this is my car, it means alot to me and i have put alot of time and work into it. I know its not alot, just another civic, but its my civic, NISSAN_FANBOYS CIVIC!


Thanks for reading, if you see me around, throw me a PM.

I have alot of plans for the car, the issue is money.
Ill keep everyone updated, being 17 and having a shit job where your parents don't like when you throw all your money into your car doesn't help.

Thanks
-Chase

dj_rice
08-20-2010, 08:34 PM
Nice build but you really need to ask for a name change :rofl:

Nissan_Fanboy
08-20-2010, 08:35 PM
Originally posted by dj_rice
Nice build but you really need to ask for a name change :rofl:

I actually wanna keep it, and get a motto changed to something like True Honda Fanboy or something that ill get mocked for hahaha.

Thanks though, i have big plans, just need the money !

streethondas
08-20-2010, 08:35 PM
looks really good Chase!

Nissan_Fanboy
08-20-2010, 08:49 PM
Originally posted by streethondas
looks really good Chase!

Thanks man,
its actually not as low as it is in the pictures, that was just me going up the drive way ;)
it will be lower after i roll the fenders, fix the cv joint and get it aligned again!

streethondas
08-20-2010, 08:59 PM
lol let me know if you need help rolling it, and yeah im going to get alignment soon after the 5lug conversion :bigpimp:

Nissan_Fanboy
08-20-2010, 09:34 PM
Originally posted by streethondas
lol let me know if you need help rolling it, and yeah im going to get alignment soon after the 5lug conversion :bigpimp:

yeah, i would love to actually keep my tires, so i am all about alignments now.
we should roll it one weekend. just need a baseball bat or somethin.
your all about the 5 lug. Im just going to keep it stock, basic. No need for 5 ;)

But i wanna find a D16 that is in better condition than mine to turbo!
Getting pretty serious about ordering a turbo kit from ebay, working with it for a bit, then swapping the turbo and wastegate.

Nissan_Fanboy
09-06-2010, 03:16 PM
UPDATE:

Picking up a Pacesetter heat wrapped 4-2-1 Header Just for fun, and an Act Clutch from my good buddy sam.

Hopefully picking up some 370cc injectors and then going to order an ebay turbo kit.

Got some information on the turbo kit too to help me keep it running strong.

- Oil re-stricter for the turbo.
- Take apart wastegate and make sure everything is in good working order
- Cast Manifolds Only.

I have a budget of around 1500 i want to try and do under.
The kit will cost me around 800, the injectors another hundred or so, the clutch 100, fuel pump 200, then the rest for tune. Plus i am going to have a 500-1000 fund in case of emergency.



1. http://cgi.ebay.ca/D-SERIES-TURBO-NEW-KIT-D15-D16-CRX-DEL-SOL-CIVIC-T3-T4-/120587201016?pt=Motors_Car_Truck_Parts_Accessories&hash=item1c138ea9f8

2. http://cgi.ebay.ca/D-series-d15-d16-civic-crx-del-sol-t3t4-full-turbo-kit-/200514240478?pt=Motors_Car_Truck_Parts_Accessories&hash=item2eaf947fde

Which kit do you guys think would be better.

INFO: My car does not have AC so i don't need to worry about that.



Question: What do you think i should do to my Z6 matience wise. I want to put some money into things like belts, plugs, fuel filter, ect... what do you guys recommend.

Sparx
09-14-2010, 06:56 PM
Do ARP head studs for sure, may as well get a fresh head gasket while thats off, water pump t belt and wouldnt be bad ideas. Plugs ull want to run copper ngks i use a 6 heat range

nykz
09-14-2010, 07:38 PM
Not sure if your interested in a new hood or trunk. Price isn't too cheap or anything either but it is obo! Not sure if you've seen it on revscene but here ya go!

http://www.revscene.net/forums/fs-eg-cf-t624735.html

Nissan_Fanboy
09-14-2010, 11:02 PM
Originally posted by nykz
Not sure if your interested in a new hood or trunk. Price isn't too cheap or anything either but it is obo! Not sure if you've seen it on revscene but here ya go!

http://www.revscene.net/forums/fs-eg-cf-t624735.html
Oh shit thanks man... i might have to give him a call or something.
I might have like 800 bucks lying around. nab em both!
I WANTTTT!


Originally posted by Sparx
Do ARP head studs for sure, may as well get a fresh head gasket while thats off, water pump t belt and wouldnt be bad ideas. Plugs ull want to run copper ngks i use a 6 heat range

Thanks man, ill deffinintlly look into all that.
Over the winter im going to gather all my parts, then either wait for a turbo kit to come up if not, get it off ebay.

But for now im going to look into a Sunroof visor, the cf hood/trunk just because that looks sooooo clean and a couple asthetic things

-Fogs
-Roof Visor
-CF Hood
-CF Trunk
See how the cash flow is, then hit up the turbo gear.

;)

chrispl
09-14-2010, 11:21 PM
looks pretty good, i like the og wheels on civics.

Nissan_Fanboy
09-15-2010, 06:22 PM
Originally posted by chrispl
looks pretty good, i like the og wheels on civics.

Thanks man, i'm embarrassed though, its deffinintlly not low enough. But im about to raise it for the winter to fender rolling isn't top priority. When spring hits, Im going to try to tuck at least an inch.

I am looking for turbo and a couple asthetic parts over winter, as well as doing some routine matience, which is boring:zzz: .

Nissan_Fanboy
09-16-2010, 10:36 AM
Picked up a Pacesetter 4-2-1 Header Heatwrapped and an Act 6 puck clutch.
Going to put the header in maybe tonight.

ericchoweg
09-16-2010, 10:38 AM
if you are going turbo why bother wasting time and money on a header?

Nissan_Fanboy
09-16-2010, 10:40 AM
Originally posted by ericchoweg
if you are going turbo why bother wasting time and money on a header?
Gathering turbo parts, not turboing until next spring though.
Was cheap, can't complain. ;) why not.

Nissan_Fanboy
09-27-2010, 10:58 PM
Well FINALLY, i rolled the fenders.
Brough her down a bit ;)
Not as low as im going, next season its down the the last thread on the coils.

Pic from the honda meet. Fenders not rolled.

http://farm5.static.flickr.com/4150/5014382884_4745df2b27_z.jpg

Lowered!

http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs649.snc4/60924_10150274575600206_898815205_14907810_6581257_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs319.ash2/59977_10150274574135206_898815205_14907791_4543805_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-ash2/hs319.ash2/59977_10150274574145206_898815205_14907793_7608380_n.jpg
Lots of room, i want a shiny SFB and LCA's ;)

Nissan_Fanboy
09-27-2010, 11:12 PM
didnt happen

Dodobird
09-30-2010, 09:43 PM
That rear window sun visor is soooooooooo beautiful. I have no idea where you could find one though?

Nissan_Fanboy
09-30-2010, 10:35 PM
Originally posted by Dodobird
That rear window sun visor is soooooooooo beautiful. I have no idea where you could find one though?

Im just going to grab one off ebay. I have seen a couple things for them, but they have disapeared. when they come back up im going to grab one.

Nissan_Fanboy
02-14-2011, 11:31 PM
ALL CAME CRASHING TO A HAULT.
Selling car,

-Rims Sold
-Rear camber sold
-Header Sold

Selling car as is,
gunna mis my first car =(

Kardon
02-15-2011, 12:20 AM
How much? I was talking to my friend about your civic just the other day cause he was looking for a car, but after all your subaru talk I thought you had already sold your civic :nut:

Nissan_Fanboy
02-15-2011, 12:21 AM
Originally posted by Kardon
How much? I was talking to my friend about your civic just the other day cause he was looking for a car, but after all your subaru talk I thought you had already sold your civic :nut:

no no still have it,
im going to buy a subaru, or whatever comes up in time within my range ;), and then sell the civic hopefully.
I have it up for 3500, but am very flexible, i can always take the exhaust and drop a bit, keep the clutch and sell stuff seperatly to lower the price down.

http://calgary.kijiji.ca/c-cars-vehicles-cars-trucks-1994-Honda-Civic-Si-Coupe-Very-Clean-W0QQAdIdZ259672856

Kardon
02-15-2011, 12:24 AM
Yeah shitty thing is, buddy just ended up buying an b16a2 ek hatch over the weekend, he was definitely interested in yours though damnit.

Nissan_Fanboy
02-15-2011, 12:25 AM
Originally posted by Kardon
Yeah shitty thing is, buddy just ended up buying an b16a2 ek hatch over the weekend, he was definitely interested in yours though damnit.

I would rather have a b16 hatch haha, not gunna lie.
Well i have a couple people interested.

Anyone wanna buy an ACT 6 puck clutch?
THROW ME AN OFFER!!!
Lots of life left in it.
At least 15,000 easy people have told me.