SR20det Pressure plate bolts (HELP!)

[94_S14]

OK, so i removed my OS Giken Super single clutch from the car, which had some (allen key) style bolts holding the clutch to the flywheel.

Now that being said, i obviously dont have OEM bolts now. The OS Giken bolts thread very smoothly and seem to have good clearance when trying to use them on my ACT to Flywheel application.

Would it be ok to use these OS giken Clutch plate bolts to hold my ACT Clutch plate to the OEM Disk?

Thanks

[Cooked Rice]

I would say you're fine, but new hardware never hurts and is cheap insurance.

[syritis]

umm, I know my OEM bolts on my mazda are grade 10. I'm yet to find anywhere in calgary that sells anything like that so i'd try and find some oem replacements.

If you clutch has locating pins you could get away with it. if not then it's a good way to destroy bearings and/or have a pressure plate go through the bell housing.

[Cooked Rice]

Probably class 10.9 which is equivalent SAE grade 8/8.1

Triad should have them.