PDA

View Full Version : FS: 1993 Accord Wagon w/ Turbo H22a



Rowdy
10-20-2010, 08:23 PM
Someone is about to get a great project!!

Vehicle Details
Year : 1993
Make and Model : Honda Accord EXR - Wagon (CB9)
Auto or Manual? : 5 speed
Odometer Reading : 260,000 kms
Location of Vehicle : Calgary
Description :

The Good:
When this engine was first built in 2007 the h22a had less 70,000 km s on it. the second owner drove less than 10,000kms on the drive train. Garrett Turbo, Jason Lange built manifold, intercooler painted black to help the sleeper look. The swap into the wagon came after I purchased the damaged 91 accord and the original creator Cressida_pimpin help an incredible amount transfering this drivetrain into the wagon. Currently running a ACT sprung street clutch, will include the ACT unsprung strip clutch and centering tool. Street clutch is easier for daily driving, smoother take up. New Autometer Boost and oil pressure gauge , walbro 255 fuel pump, 17" ADR rims, brand new oem hood (not installed), winter tires on steelies come with the sale. Car pulls very strong , and drives very well. The interior of the car is in very good shape, bone stock EXR interior. Power windows, sunroof, locks all work well. New brakes all around with Brembo Blank front rotors from JDM Source. New twin tip stainless steel muffler, great sound, looks subtle, and clean. So much more that I can't remember at the moment.

The Bad:
UPDATE: 5/10/12 - last time i drove the car, I started it and drove around the corner to put some gas in it, started right up after charging the battery, got around the corner and it died, I could hear that the fuel pump wasnt running. Best guess is the leads are corroded. It was a new walbro pump 4 years ago, since the swap it has hardly been driven. The car has been parked now for 4 years.


Typical honda rust on rear fenders, needs to be cut out and redone. The TPS was damaged during the swap, and have not had it fixed yet, causes some hesitation at part throttle below 3500 rpm, but idles fine and at higher rpm is fine, but needs to be fixed. The AC was lost during the swap, no room for it with the manifold. Cruise also not redone, but was not a concern for me.

This car is a total sleeper. No one expects this in a wagon. I have put less than 500 kms on it since the swap. I moved to a new house and have been doing huge reno's and just never got the time to finish it up the drive it the way I hoped. My loss your gain.



it's SOLD! Thanks


original Cressida_Pimpin ad: http://forums.beyond.ca/st/178068/fs-1991-accord-turbo-330whp/

EX9 ad: http://forums.beyond.ca/st/193720/fs-1991-h22-turbo-accord/



Pictures :http://i307.photobucket.com/albums/nn311/jwnorth2/IMG_0220.jpg

http://i307.photobucket.com/albums/nn311/jwnorth2/IMG_0221.jpg

http://i307.photobucket.com/albums/nn311/jwnorth2/Engine.jpg

soo_jdm
10-20-2010, 08:43 PM
what kind of power is this thing putting down, mad props !! great turbo swap on an even more interesting car haha

Rowdy
10-20-2010, 09:01 PM
At 9psi its making 310 hp to the wheels. It pulls well.:burnout:

soo_jdm
10-20-2010, 09:04 PM
entertaining trades at all ?

Rowdy
10-20-2010, 09:07 PM
not at the moment. I have 4 vehicles and 2 drivers. So I am clearing things out.

soo_jdm
10-20-2010, 09:08 PM
okay if you change your mind let me know haha GLWS man !!

racerjim
10-22-2010, 09:42 PM
Original Post Removed. (Please read the Forum Rules and Terms of Use (http://forums.beyond.ca/articles.php?action=data&item=1) before posting again, or risk getting banned).

Nissan_Fanboy
10-23-2010, 01:45 AM
Originally posted by Rowdy
At 9psi its making 310 hp to the wheels. It pulls well.:burnout:

Do you have a dyno sheet to prove that?
Would be interesting if it did make those numbers.

Thanks
-Chase

Rowdy
10-23-2010, 11:58 AM
When the car was engine was first built and tuned at there was a dyno sheet. When I bought the car Ryan was not able to find it. So I never got it, and therefore cannot post, sorry. The original sheet from what Cressida_Pimpin told me, and who I have no reason not to trust, had it making 330hp at 12 psi and 310 at 9 psi. I have not brought it back to the dyno, Cressida_Pimpin and I swapped over the entire drivetrain and ecu with the tuned chipfrom the coupe it was in. There has not been more that 6000 kms on this setup since it was tuned.

Rowdy
10-23-2010, 12:05 PM
Originally posted by racerjim
Very cool wagon, i have similar plans for mine, its already got the H22 in it.

Any idea what the turbo kit is worth? or who i would go to for tuning once the turbo is on?

thanks

Thanks, the car totally surprises people. There is over $7000 into the drivetrain, between the JDM H22 engine and the turbo system and clutch. All parts, no labour in that, Jered (Cressida_Pimpin) and myself were doing all the work. Tecmotion did the original tune, and they have worked on many vehicles for others I know, they are who I would be going to for dyno and tuning.

Rowdy
11-01-2010, 04:57 PM
My price is obo, give me a PM or call to arrange a drive.
403-875-2032 Jared

Rowdy
04-09-2011, 09:16 AM
Spring is here and this car needs to go, so I will price it accordingly. $4800.00 OBO

Rowdy
05-10-2012, 03:06 PM
UPDATED PRICE WANT IT GONE ASAP! MAKE AN OFFER

Will need to be towed out due to fuel pump not coming on.

$3300.00 obo

Low-Life
05-10-2012, 09:58 PM
if the fuel pump is not turning on, change theh main fuel relay (located under the dash near the hood pop puller thingy) its a silver and orange box. super common issue with accords..

GLWS if i had 3300 id be on it like white on rice. dope car.

Rowdy
02-17-2014, 11:21 PM
Updated the price. This needs to go, I have no time for it. The last 4 years I have been able to do nothing on it. Best offer will get it.

cressida_pimpin
04-07-2014, 06:39 PM
Original Post Removed. (Please read the Forum Rules and Terms of Use (http://forums.beyond.ca/articles.php?action=data&item=1) before posting again, or risk getting banned).

Rowdy
04-08-2014, 08:03 AM
Dropped the price to $2000. Will that be enough to have it gone by the weekend?

DeleriousZ
04-08-2014, 09:07 AM
Got any recent pics of the rust?