iron_man888
11-08-2010, 02:29 PM
I’m looking for someone who has access to fabricate me some metal shims for the runners on my skeleton sled. Unfortunately it’s a custom made sled and there aren’t anything specific I can buy from the shop to make this work properly.
The shim dimensions I need are 3/4" long , ½ wide and ideally 1mm thick (roughly the thickness of a folded over piece of masking tape).
I’m kinda at a loss as im unfamiliar with machine or metal working shops so I was hoping for someone to steer me in the right direction.. Thanks in advance everyone :)
The shim dimensions I need are 3/4" long , ½ wide and ideally 1mm thick (roughly the thickness of a folded over piece of masking tape).
I’m kinda at a loss as im unfamiliar with machine or metal working shops so I was hoping for someone to steer me in the right direction.. Thanks in advance everyone :)