PDA

View Full Version : operation Slammed EF



portuguesenrg
12-13-2010, 08:15 PM
sooo im starting my build after awhile of waiting for parts ,
soo its a 1991 civc hb . im in the works of putting tein basics on it
i have the driver side done , im working on unseizing the rear control arm bolts and im running out of ideas on how to get them
off, the driver side i had to cut them but i really dont wanna do that

portuguesenrg
12-13-2010, 08:26 PM
need some idea's of where to get a front lip for it , and weather or not to strip the inside

TT-fast
12-13-2010, 09:33 PM
the bolts seized inside the bushings? its really common for older hondas and integras, basically if you cant drill it out, heat it up and pull it out, or just hammer it out, if all else fails then you will need new lca's its better to buy aftermarket ones like skunk or megan, they are way cheaper than oem,

it took me around 5 hours of everthing i could try to get them out, i just ended up buying new lca's and what a coincidence i was installing tein basics:banghead:

portuguesenrg
12-13-2010, 10:34 PM
Haha it took me about the same but I just went to honda and ordered new bushings they were only 20 bucks

TT-fast
12-13-2010, 10:40 PM
or that works also. i was going to say i had a left over lca, and also a rear red megan tie bar. if u wanted either

portuguesenrg
12-13-2010, 10:42 PM
After market lca? And ill deffently grab the tie bar from you

TT-fast
12-13-2010, 10:45 PM
Pm'd!!

portuguesenrg
12-14-2010, 09:00 PM
http://i4.photobucket.com/albums/y149/parker96/2010-12-14181707.jpg

http://i4.photobucket.com/albums/y149/parker96/2010-12-14194538.jpg

http://i4.photobucket.com/albums/y149/parker96/2010-12-14194553.jpg

http://i4.photobucket.com/albums/y149/parker96/2010-12-14194617.jpg

http://i4.photobucket.com/albums/y149/parker96/2010-12-14194736.jpg

well todays progress i went to autodream and went and picked up some parts such as, megan polished tie bar, megan red LCA, and just a pic of the coils that are on it .

finished the driver side , now working on other side i have the front off but im dealing with a sized bolt on the rear need to figure a way to get it out

portuguesenrg
12-15-2010, 12:46 AM
<rust3

portuguesenrg
12-19-2010, 05:55 PM
alright guys i had some free time today to work on my car i have
most of it all done i managed to get all the bolts unseized and off , so il have pics up shortly

Myz
12-19-2010, 06:56 PM
Hey man.
Sweet LCA's.
Being a Blue car, what made you go with red LCA's?

portuguesenrg
12-19-2010, 06:59 PM
That was all autodream had in stock and they gave me a deal

portuguesenrg
01-03-2011, 11:17 PM
welll beyonders finally got it all done after having some free time now that the hoildays are over ! , looks pertty sweet . will have pics up in a few minuts here

hope you enjoy

portuguesenrg
01-03-2011, 11:49 PM
alright and here a quick few pics :

http://i4.photobucket.com/albums/y149/parker96/DSCF2523.jpg

http://i4.photobucket.com/albums/y149/parker96/DSCF2528.jpg

http://i4.photobucket.com/albums/y149/parker96/DSCF2532.jpg

and what would a slammed car be with out its buddy

Nissan_Fanboy
01-03-2011, 11:57 PM
Originally posted by portuguesenrg
[/B]

hope those coils aren't maxed

portuguesenrg
01-04-2011, 12:11 AM
No not yet will do finall adjustment when spring comes

uptown.
02-04-2011, 01:49 AM
I would do something about that rust

OBDIIM50
02-04-2011, 08:49 PM
92' slammed m3 (sold)

You sold an E36 M3 to slam a fucking civic?

tobypaddock
02-04-2011, 09:12 PM
Originally posted by uptown.
I would do something about that rust

:werd:


Originally posted by OBDIIM50
92' slammed m3 (sold)

You sold an E36 M3 to slam a fucking civic?


:werd: Im confused as to what you're trying to accomplish with this car? are u just slamming the car and leaving it at that? or are you just buying whatever you get a deal on with no real direction for the car?
I know you mentioned gutting the car - are u planning on tracking the car?

Jeremiah
02-04-2011, 09:15 PM
Looks stock?

Operation Repo

http://www.celebrityfreakshow.com/wp-content/uploads/2009/11/operationrepo.jpg

And remember, it aint no joke if you dont pay that note. YEEEEEEEEEEEAH

OBDIIM50
02-04-2011, 09:18 PM
^makes no sense to me... haha.. explain to me

I saw screw the suspension and paint it orange and apply dragon decals.. PLEASE!

portuguesenrg
02-13-2011, 08:05 PM
hey no i dident sell a m3 for this car so calm ur self down , before u hurt ur self

and no i dont plan on just slamming it , its a slow project that i just started . down the road i do plan on having some fun on a track , but this build is just doing this and that . i dont have any real plans for it

portuguesenrg
02-13-2011, 08:12 PM
heres some recent pics

http://i4.photobucket.com/albums/y149/parker96/2011-02-09073307.jpg


heres one beside at factory si

http://i4.photobucket.com/albums/y149/parker96/2011-02-08133425.jpg

i need to ditch the ballon tires in the summer

Sakujo
02-27-2011, 07:28 PM
This isnt really a "build thread" more like a few pictures of coilovers installed on a rusty civic...
no offense..

~Touge/Wangan-
03-15-2011, 08:32 PM
Originally posted by OBDIIM50
92' slammed m3 (sold)

You sold an E36 M3 to slam a fucking civic?
$1400 coilovers on a $400 car?...

:nut:

portuguesenrg
03-15-2011, 09:24 PM
Basically lool

Myz
03-15-2011, 09:58 PM
This isnt really a "build thread" more like a few pictures of coilovers installed on a rusty civic...
no offense..
It was a Work in Progress til he decided to sell.
Not that i'm "sticking up" for him.....Just filling you in!


$1400 coilovers on a $400 car?...

Sheesh....Cut a guy some slack!
Surely he won't get his cash back but its all about passion for the game.

OriginalGoods
03-15-2011, 11:42 PM
+1

~Touge/Wangan-
03-16-2011, 10:38 PM
yeah ok i get that, but doesen't it make more sense to add $1400 and such in misc. parts to the $400 car and buy something better?.

besides, he sold an M3 for THIS?.

i understand it's all about modding cars and the joy of it, but this decision boggles my mind, completely.

OBDIIM50
03-16-2011, 10:54 PM
^YOU are win! That's what I don't get! E36 M3 is such a great car. Just wondering if it was a E36 325i "m3 special" edition! LOLOL just like all of them on kijiji

4lti
03-16-2011, 11:07 PM
Its all about the stance!
At least hes putting quality parts on it rather then ebay specials.

Myz
03-16-2011, 11:54 PM
yeah ok i get that, but doesen't it make more sense to add $1400 and such in misc. parts to the $400 car and buy something better?.
Definitely makes Financial sense since its value for money.
But seeing something like this chop up a newer model car down the 400 or even around a track is definitely more fun/enjoyable/satisfying.
I'm not denying what you're saying is correct but i guess each of us make decisions cos:
-we can justify it to ourselves
-we're spending our own hard earned cash


besides, he sold an M3 for THIS?.

i understand it's all about modding cars and the joy of it, but this decision boggles my mind, completely.


Valid point.
E36 M is still a dream of mine (which i hope to achieve someday) but look at the list of cars he's owned. He didn't literally sell the M3 for the EF. there were several cars in between.

Anyway, I'm going to leave Portuguesenrg to speak for himself.
I just wanted to chime in cos i faced pretty much the same comments when i built my last track car & i face the same questions with my present build.

OriginalGoods
03-19-2011, 03:14 PM
I'd take a built ef over any super car. If I won a super car I would use the money to travel to different parts of the world and find the most mint ef's and bring home a fleet of cars !

Myz
03-19-2011, 05:39 PM
[email protected] Original Goods:D

se7en
04-02-2011, 12:08 PM
It would look nicer if it didn't have parts on it that were paid for with money he scammed from me

Nissan_Fanboy
04-02-2011, 01:53 PM
Originally posted by se7en
It would look nicer if it didn't have parts on it that were paid for with money he scammed from me

Do go on ?

se7en
04-02-2011, 02:25 PM
NM, got my money back.