PDA

View Full Version : LF: Tein spanner wrenches/coilover wrenches



z2two
04-27-2011, 11:44 PM
got them from simon. Thanks dude

Modelexis
04-28-2011, 09:59 PM
You don't need the special tool to adjust them.
Grab a flat head screw driver and hammer, tape up the end of the screw driver for extra protection against paint scratching on the coilovers.

put it on the lower coilover cog and tap it with a hammer, this will break it loose from the upper cog.

After you have it loose, move it just by hand into place, and when you have it in place, do the opposite:
move the lower cog up tight to the upper cog by hand, then to secure it tap the cog with the screw driver and hammer in the direction that creates a tight fit.

Done and Done!

Projek01
04-30-2011, 01:48 PM
be careful with the tein perches though. the metal is soft and you can potentially deform them. hopefully the salt this year hasnt gotten inside the threads. make sure you scrub down the threads once you get access to them. sorry, i dont have the wrenches either

simonseys
04-30-2011, 03:09 PM
Mike, text me, I have some you can borrow