LAFNGAS
05-08-2011, 02:57 PM
tan cavalier headliner for a sunroof car, has everything and in good shape
2.4 power steering pump
2.4 head with cams and full valve train
2.4 power steering pump pressure side hose (brand new)
2.4 throttle body with sensors
2.3 HO injectors
95-99 air bags with sensors and everything to work
2.4 block with 2 cranks
2.4 rods/pistons and full bottom end
2.4 intake manifolds
idi covers
MSD 8.5mm spark plug wires for a 2.2 or 2.4 coil swap (brand new)
2.4 coil packs and icms
2.4 stock springs
autometer ultra lite narrow band a/f gauge
trunk net
rear fender liners like off the 03+ cavaliers (brand new)
12" rotors for rear big brake kit, someone will have to fab something up though
3/8 -> -6 quick connector with -6 stainless braided line and includes the fitting for the fuel rail thats threaded to the -6
spec lightweight flywheel for a 2.4 (needs a new friction plate) $125 for the flywheel and $200 for the flywheel and i get the friction plate for you
5x black 2.5" reinforced couplers
1x black 4" coupler
1x 2.5" t bolt clamp
2x 2.75 t bolt clamp
misc -10 aeroquip fittings
45* part # is fcm 4024
90* part # is fcm 4034
60* part # is fcm 4084
arp headstud parts for a 2.4
have the washers/nuts and 2 of the short studs, can get the long studs no problem and ship as a full kit
2.4 power steering pump
2.4 head with cams and full valve train
2.4 power steering pump pressure side hose (brand new)
2.4 throttle body with sensors
2.3 HO injectors
95-99 air bags with sensors and everything to work
2.4 block with 2 cranks
2.4 rods/pistons and full bottom end
2.4 intake manifolds
idi covers
MSD 8.5mm spark plug wires for a 2.2 or 2.4 coil swap (brand new)
2.4 coil packs and icms
2.4 stock springs
autometer ultra lite narrow band a/f gauge
trunk net
rear fender liners like off the 03+ cavaliers (brand new)
12" rotors for rear big brake kit, someone will have to fab something up though
3/8 -> -6 quick connector with -6 stainless braided line and includes the fitting for the fuel rail thats threaded to the -6
spec lightweight flywheel for a 2.4 (needs a new friction plate) $125 for the flywheel and $200 for the flywheel and i get the friction plate for you
5x black 2.5" reinforced couplers
1x black 4" coupler
1x 2.5" t bolt clamp
2x 2.75 t bolt clamp
misc -10 aeroquip fittings
45* part # is fcm 4024
90* part # is fcm 4034
60* part # is fcm 4084
arp headstud parts for a 2.4
have the washers/nuts and 2 of the short studs, can get the long studs no problem and ship as a full kit