LUDELVR
05-18-2011, 09:34 AM
I'm trying to clean out my garage so I'll be trying to get rid of this stuff. It's been sitting fore a while since swapping out so I'm really not bothered if it doesn't sell, but if you see something you like and you don't agree with the price, by all means, shoot me an offer.
1. 2001 S2000 black leather seats, driver's and passenger's.
These are in fairly good shape. Haven't had them in for over year. There is some slight wear on the side bolster on the driver's side but it's not too bad compared to some. I'd rate these about an 8/10 or maybe higher. Haven't seen them in a while so I'll have another look
Back up for sale, didn't hear back from original interest.
$500 -
Seats are in pretty good shape, but very dusty in the photos. Side bolster isn't as bad as it looks. The lighting makes it look worse than it is:
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/247029_10150265866025180_528475179_9421231_6965956_n.jpg http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/254057_10150265866365180_528475179_9421237_6095596_n.jpg http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/255172_10150265866715180_528475179_9421242_2998625_n.jpg
4. AP1 S2000 rear bumper valences.
Well, I bought these thinking I'd install them but ended up getting something different and these have been sitting in my garage now for a while. They have never been installed but when I put them up to the car, there will be some modding needed to get them to fit properly. They are made of fiberglass so this shouldn't be too difficult if you know how to do it or if you get someone to do it for you. You could probably even get these to fit another car if you're so inclined to try.
Here's a photo of them:
http://www.kgsengineering.com/images/00HDS2K2DTRA-012.jpg
I'm looking for $25 -
8. AP1 Black door inserts
These are in excellent condition. I swapped out for some red ones. These are just the door insert and not the entire door panel.
Asking $100 -
http://img52.imageshack.us/img52/2091/p5211139.jpg
http://img6.imageshack.us/img6/8130/p5211140.jpg
9. Ap1 Black and red door panels
These are the black panels with the red door inserts. They are in relatively good shape; however, the previous owner decided to put tweeters on the corners closest to the back part of the insert so I removed them and there was a bit of a hole so I took a strip of Carbon fiber material, the DiNoc stuff and put it over the back. It actually doesn't look bad! haha, but the rest of the panel is in great shape.
Asking $200 -
http://img651.imageshack.us/img651/1107/p5211141.jpg
http://img8.imageshack.us/img8/94/p5211143.jpg
http://img94.imageshack.us/img94/8190/p5211142.jpg
http://img850.imageshack.us/img850/8784/p5211144.jpg
10: PAC OEM-1 system interface (Nissan)
This was used for several months for an aftermarket head unit in a 2004 Nissan 350z with the Bose system. You NEED this to get an aftermarket deck to work well with the Bose System. Here are some specs:
The OEM-1 makes it easy to upgrade a factory 'premium' system, such as a GM Delco/ Bose® or a Ford/ JBL. Whether replacing the factory radio or amplifier, the OEM-1 is your 'plug and play' solution. The OEM-1 provides a 4 channel RCA output when adding an additional. The OEM-1 gives you a fast and accutate installation without the need to cut wires. The AOEM kits will also work for adding an amp to some GM vehicles without Bose® or with Monsoon.
•Connects to the vehicle's wiring and offers a 4-channel RCA audio output for adding aftermarket amplification.
•Provides full range audio output 20 to 20,000Hz.
•Can also be used to add an aftermarket radio to a factory amplified sound system.
•Can be used to install an aftermarket radio in a vehicle with a factory amplified sound system or to add an aftermarket amplifier to a factory headunit
•Transformer isolated for optimal sound and performance
For some reason shipping was half the price of the unit! Anyway, brand new this is pretty pricey.
Looking for $50 -
11: Axxess GMOS LAN 01 with onstar (was used in 2008 silverado aftermarket stereo)
I bought this from Visions but think I may have gotten ripped off...surprise surprise!
Anyway, looking to get rid of this thing. It was out of a 2008 Chevy Silverado with onstar at allowed for an aftermarket deck to work with it. I paid 200 bux for it.
Looking for $100 -
12: 2001 AP1 S2000 shift knob
In good condition.
Looking for $50 -
http://img804.imageshack.us/img804/4760/p5211138.jpg
14: OEM springs - $50 obo
I think that's it for now. I'll try and update this as I find more items and I'll try and get pictures upon request.
These are in Canadian Dollars and they do not include shipping but keep in mind that my prices are obo so shoot me an offer if you'd like.
Cheers lads! :thumbup: :tipwink:
1. 2001 S2000 black leather seats, driver's and passenger's.
These are in fairly good shape. Haven't had them in for over year. There is some slight wear on the side bolster on the driver's side but it's not too bad compared to some. I'd rate these about an 8/10 or maybe higher. Haven't seen them in a while so I'll have another look
Back up for sale, didn't hear back from original interest.
$500 -
Seats are in pretty good shape, but very dusty in the photos. Side bolster isn't as bad as it looks. The lighting makes it look worse than it is:
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/247029_10150265866025180_528475179_9421231_6965956_n.jpg http://a8.sphotos.ak.fbcdn.net/hphotos-ak-ash4/254057_10150265866365180_528475179_9421237_6095596_n.jpg http://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc6/255172_10150265866715180_528475179_9421242_2998625_n.jpg
4. AP1 S2000 rear bumper valences.
Well, I bought these thinking I'd install them but ended up getting something different and these have been sitting in my garage now for a while. They have never been installed but when I put them up to the car, there will be some modding needed to get them to fit properly. They are made of fiberglass so this shouldn't be too difficult if you know how to do it or if you get someone to do it for you. You could probably even get these to fit another car if you're so inclined to try.
Here's a photo of them:
http://www.kgsengineering.com/images/00HDS2K2DTRA-012.jpg
I'm looking for $25 -
8. AP1 Black door inserts
These are in excellent condition. I swapped out for some red ones. These are just the door insert and not the entire door panel.
Asking $100 -
http://img52.imageshack.us/img52/2091/p5211139.jpg
http://img6.imageshack.us/img6/8130/p5211140.jpg
9. Ap1 Black and red door panels
These are the black panels with the red door inserts. They are in relatively good shape; however, the previous owner decided to put tweeters on the corners closest to the back part of the insert so I removed them and there was a bit of a hole so I took a strip of Carbon fiber material, the DiNoc stuff and put it over the back. It actually doesn't look bad! haha, but the rest of the panel is in great shape.
Asking $200 -
http://img651.imageshack.us/img651/1107/p5211141.jpg
http://img8.imageshack.us/img8/94/p5211143.jpg
http://img94.imageshack.us/img94/8190/p5211142.jpg
http://img850.imageshack.us/img850/8784/p5211144.jpg
10: PAC OEM-1 system interface (Nissan)
This was used for several months for an aftermarket head unit in a 2004 Nissan 350z with the Bose system. You NEED this to get an aftermarket deck to work well with the Bose System. Here are some specs:
The OEM-1 makes it easy to upgrade a factory 'premium' system, such as a GM Delco/ Bose® or a Ford/ JBL. Whether replacing the factory radio or amplifier, the OEM-1 is your 'plug and play' solution. The OEM-1 provides a 4 channel RCA output when adding an additional. The OEM-1 gives you a fast and accutate installation without the need to cut wires. The AOEM kits will also work for adding an amp to some GM vehicles without Bose® or with Monsoon.
•Connects to the vehicle's wiring and offers a 4-channel RCA audio output for adding aftermarket amplification.
•Provides full range audio output 20 to 20,000Hz.
•Can also be used to add an aftermarket radio to a factory amplified sound system.
•Can be used to install an aftermarket radio in a vehicle with a factory amplified sound system or to add an aftermarket amplifier to a factory headunit
•Transformer isolated for optimal sound and performance
For some reason shipping was half the price of the unit! Anyway, brand new this is pretty pricey.
Looking for $50 -
11: Axxess GMOS LAN 01 with onstar (was used in 2008 silverado aftermarket stereo)
I bought this from Visions but think I may have gotten ripped off...surprise surprise!
Anyway, looking to get rid of this thing. It was out of a 2008 Chevy Silverado with onstar at allowed for an aftermarket deck to work with it. I paid 200 bux for it.
Looking for $100 -
12: 2001 AP1 S2000 shift knob
In good condition.
Looking for $50 -
http://img804.imageshack.us/img804/4760/p5211138.jpg
14: OEM springs - $50 obo
I think that's it for now. I'll try and update this as I find more items and I'll try and get pictures upon request.
These are in Canadian Dollars and they do not include shipping but keep in mind that my prices are obo so shoot me an offer if you'd like.
Cheers lads! :thumbup: :tipwink: